User manual

SEPARATE FLASH UNIT CONNECTION
Separate ash units can be electrically connected by the Hot
Shoe accessory holder (see Warnings below) on the top of the
Viewnder (A) or by a cord to the PC Connection Port (B) on
the left hand side of the camera body. Slave unit switches and
transmitters can also be connected to the unit (see specic
User Guides for details).
Keep the plastic safety cover in place in the Hot Shoe (A) when
not in use.
WARNING!
Only ash units specially adapted for use with the H6D can be
connected to the Hot Shoe on the camera.
WARNING!
Do not attempt to connect a ash unit, dedicated for use with
other camera brands, to the Hot Shoe. The ash unit or the
camera could be damaged.
H6D www.hasselblad.com
USER GUIDE
To Use
86
Table of Content
A Hot Shoe
B PC Connection Port
A
B