User manual

AUTOMATIC EXPOSURE MODE
To change the Exposure mode Swipe Down to display the Control
Screen or press the EXP button on the Viewnder.
Automatic exposure provides a choice of two ways to control the
shutter speed and aperture settings semi automatically and two
ways fully automatically.
Aperture priority A
The aperture is manually set by turning the front scroll wheel,
and the shutter speed is automatically set by the camera.
Shutter priority S
The shutter speed is manually set by turning the front scroll
wheel, and the aperture is automatically set by the camera.
Programmed P
In this mode, an aperture/shutter combination is automatically
set according to the EV measured (metering method remains as
set).
Programmed variable Pv
This mode is very similar to Programmed, except with the
additional parameters of lens focal length being automatically
set. For example, long shutter speeds will automatically be
avoided with a long focal length lens (see illustration on the
following page).
In Automatic mode the front scroll wheel sets alternative
aperture/shutter combinations while maintaining the same
EV and the rear scroll wheel alters the amount of exposure
compensation. The compensation appears as a +/- symbol on
the grip display and viewnder display.
Note!
Aperture and shutter speed settings can both be changed even
while the ready light on Sensor Unit is ashing.
H6D www.hasselblad.com
USER GUIDE
To Use
77
Table of Content
Exposure Modes
Grip Display.
Exposure Modes
Sensor Unit Display.
EXPOSURE MODE
Manual
Program Program
Variable
Aperture Shutter
Video