User manual

4.4 CONNECT TO A COMPUTER
1 Connect a USB 3 cable to the USB port on the computer.
2 Connect the USB 3 cable to the USB port on the camera.
Note!
When connected to a computer, the following applies:
● The destination medium and location are controlled from
Phocus.
● Exposure settings, including ISO, aperture and exposure
time, can be controlled from Phocus or from the camera.
In addition extra tools such as Live Video, remote focus
control are available. See Phocus User Manual for full
description.
Note!
The buttons on the Sensor Unit have no functions when the
Camera is connected to a computer.
When initiating a shot from Phocus, the computer sends a signal
to the Sensor Unit, which triggers the shutter (and strobe/
ash, if any). The camera then sends the capture over the
USB connection to the computer, where it is displayed on the
computer screen and saved as a 16-bit 3F le in the currently
selected folder on the computer hard disk.
Table of ContentH6D www.hasselblad.com
USER GUIDE
To Prepare
57