User manual

TO REMOVE A MEMORY CARD
Remove CFast card
1 Open the memory card slot cover on the sensor unit (A).
2 Press the CFast card (B) a little way in and then release it.
3 The card is then pushed out a few millimeters.
4 Grab the card and pull it away from the sensor unit.
5 Close the slot cover door.
Remove SD card
1 Open the memory card slot cover on the sensor unit (A).
2 Press the SD card a little way in and then release it. The SD
card will then move out from the SD card slot (C).
3 Grab the card and pull it away from the sensor unit.
4 Close the slot cover door.
Note!
Do not remove a CFast or SD card from the Sensor Unit if the
ready-light (D) is blinking! The ready-light (D) is displayed in the
lower right corner on the Sensor Unit display.
All les on the card may become corrupted (and consequently
lost) if you do so and new formatting may also be necessary.
LV
DisplayWi-Fi
Exposure
MAIN MENU
StorageLive View
AF
Focus Self Timer
A
B C
D
H6D www.hasselblad.com
USER GUIDE
Overview
48
Table of Content