User manual

3.26 MEMORY CARDS
There are two types of memory cards that can be used with the
H6D camera.
1 CFast card.
2 SD card (UHS-I).
When using a CFast card or SD card, the H6D is completely
self contained. No additional wires or connectors needs to be
attached.
The recommended type is UDMA/type 4 /60MBs (400x) or
better.
The H6D is shipped with an 16 GB SDXC SD card, which is
capable of holding approximately 75 − 150 captures (according
to model).
Note!
All cards should be formatted in the camera before rst use!
Memory Card Status on Grip Display
CFast card
C Inserted, non active.
C< Inserted, active.
C[0] Full.
C! Card Error.
No Symbol No Card inserted.
SD card
S Inserted, non active.
S< Inserted, active.
S[0] Full.
S! Card Error.
Lock Symbol Card Write Protected.
No Symbol No Card inserted.
CFast Card
San Disk Extreme PRO CFast 2.0
Lexar Professional 3400x CFast 2.0
Wise CFAST 2.0 Green
Wise CFAST 2.0 Blue*
*Only newer blue cards with a letter “H” in the top
right of the card sticker are supported.
SD Card
SanDisk Extreme PRO 95MB/s (SDHC-I)
SanDisk Extreme PRO 300MB/s (SDHC UHS-II)
Lexar Professional 2000x (SDXC UHS-II)
Delkin SD1900X
(UHS-II cards at UHS-I speed, 80 MB/s)
Currently Approved Cards
Grip Display View
Control Screen on Sensor Unit Display
1 2
H6D www.hasselblad.com
USER GUIDE
Overview
46
Table of Content