User manual

H6D www.hasselblad.com
USER GUIDE
View Camera Connectivity
177
Table of Content
PINHOLE MODE
Pinhole mode can be used when the optical system does not
have a ash sync terminal.
Procedure:
1 Detach the Sensor Unit from the H6D camera body. Be
careful not to damage the IR lter in front of the sensor.
2 Attach the Sensor Unit to the Camera. Follow instructions
from the manufacturer.
3 Connect external power to the DC input socket (A). The
Sensor Unit will automatically start.
4 From the Camera Menu, select Camera Body. In the pop-up,
select “Pinhole”. Press Menu button or tap outside pop-up
to save and close.
5 Exposure time is set on the Control Screen.
Control Screen
In Pinhole Mode, the Control Screen has fewer items than when
used on an H camera. From this screen you can change:
● White Balance
● ISO
● Exposure Time
● Exposure Mode (Manual or Video)
An exposure is triggered by pressing the orange button (B). It
can be made both from the Control Screen and from the Live
View screen.
You can also activate Live View by tapping the “LV” icon (C).
When Live View is active, an orange exposure button is shown.
Note!
The button in Live View can be dragged to any location by
pressing and holding.
Power Connection
Control Screen in Flash Sync mode
Live View in Pinhole mode
A
Camera Body Settings Menu
ISO
Pinhole
2.0
s
B
C
ISO 100
2.0s [212]