User manual
H6D www.hasselblad.com
USER GUIDE
To Use
152
Table of Content
CHANGE FOCUSING SCREEN
The H6D is tted with a Spherical Acute Matte D
Focusing Screen for extreme brightness, clarity and even
illumination. An optional accessory screen with a grid
pattern is also available.
To change the Focusing Screen, remove the viewnder to
access the Focusing Screen.
To remove the screen, place the tip of a ballpoint pen
or similar in the Focusing Screen removal lug and pull
upwards. To replace the Screen, position the right side of
the Screen in place so that it sits correctly in the recess.
Place the tip of a ballpoint pen or similar in the Focusing
Screen replacement indentation and press downwards
until the Screen snaps into position. Try to avoid touching
either surface of the Screen with bare ngers.
Note!
Do not attempt to clean the Focusing Screen by
immersing it in water.
Do not use any kind of cleaning uid.
If the Screen becomes damp, do not use hot air to dry it.
Use a soft cloth on the upper surface only.
Seek advice from an Authorized Hasselblad Service
Centre if the Screen becomes particularly soiled.
Remember that particles or greasy marks on the Screen
might impair the viewnder image but have no effect on
the recorded image.
Focusing Screens showing the difference in masking and
composition frame marking. Type varies according to sensor
size. See under Accessories for other types (with grid pattern,
for example).