User manual

H6D www.hasselblad.com
USER GUIDE
To Use
147
Table of Content
Main Screen
This is the Main Screen of the Viewnder Display. It shows the
most important exposure information.
To the left the exposure mode is displayed, Manual Mode
in this case. The scale with an arrow shows the exposure
compensation setting. In the centre of the display the aperture
and shutter speed are displayed. If an exposure compensation
is set, a sign with a plus and minus is displayed between the
aperture and shutter speed value. Second from the right the
exposure counter is shown. To the far right the light meter mode
is displayed, Spot meter mode in this case.
Menu Mode
Normally the Front and Rear Scroll Wheels are used to control
aperture and shutter speed values. If you would like to use the
wheels to navigate the menus of the Sensor Unit, rst press the
MENU button. Then the menu symbol is shown in the centre of
the display to remind you that the camera is now in menu mode.
As long as the menu mode is active it is possible to use the
wheels to navigate the menu system of the sensor unit. If you
would like to leave the menu mode, and use the wheels for
aperture and shutter speed, press the menu button again or
half-press the shutter release button.
Browse
To reach Image Browse Mode, press the Browse (play) button
on the right side of the Grip Display. Then the Browse Mode is
activated and it is possible to Browse Images on the Sensor
Unit using the wheels. To exit Browse Mode half-press or press
the Browse button again.
ISO Settings
Press the ISO button to display the ISO Settings Menu.
Use the Front or Rear Scroll Wheel to scroll left and right
between available ISO numbers. Half-press or press the ISO
button once again to leave the menu and save the new value.
Manual mode selected.
Menu symbol.
ISO settings, ISO 400 selected.
Browse Mode icon.
VIEWFINDER DISPLAY EXAMPLES