User manual

H6D www.hasselblad.com
USER GUIDE
To Use
142
Table of Content
GRIP DISPLAY NAVIGATION
Main Screen
This is the Main Screen of the Camera Grip Display. These
are the most important camera settings. The top row displays
WB, AF and ISO. The middle displays Aperture, Shutter Speed,
EV (Exposure Value) and Exposure Compensation values are
displayed. At the bottom of the screen Exposure Mode, Light
Meter Method, Drive Mode, Battery Level, Exposure Counter and
Status of the memory cards are displayed.
Menu
Normally the front and rear wheels are used to control aperture
and shutter speed values. If you would like to use the wheels
to navigate the menus of the Sensor Unit, rst press the MENU
button. Then the Menu symbol is shown in the centre of the
display.
When Menu Mode is active it is possible to use the wheels
to navigate the menu system of the Sensor Unit. To leave the
Menu Mode (and use the wheels for aperture and shutter
speed) press the Menu button again or half-press the Shutter
Release button.
White Balance (WB)
1 Press the WB button above the Grip Display to show the WB
Menu.
2 Select WB mode by scrolling left or right with the front wheel.
3 Get back to the Main Screen by half-press on the Shutter
Release button or by clicking the WB button again.
White Balance Manual (WB)
1 To set the Colour Temperature manually, scroll the Front
Scroll Wheel until “M” is displayed.
2 Then the Colour temperature value is displayed at the
bottom of the screen.
3 Use the Rear Scroll Wheel to select Colour Temperature in
Kelvin, K.
ISO
1 Press the ISO button to show the ISO menu.
2 Use the Front Scroll Wheel to scroll up and down between
available ISO numbers.
3 Half-press or click the ISO button once again to leave the
menu.
Main Screen
Grip Display Main
Screen.
WB
Grip Display White
Balance (WB) Screen.
Menu
Grip Display Menu
symbol on Screen.
WB Manual
Grip Display Manual
White Balance (WB)
Screen.
ISO
Grip Display Manual
ISO Screen. ISO 400
displayed.