User manual

FORMAT CFAST AND SD CARDS
MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT CARD
The camera is only able to read and write to storage media
that have been formatted correctly. New cards sometimes
have no formatting, or you might want to convert a card that
is currently using a format that the camera cannot read. In
either case, you must reformat both CFast cards and SD cards
in the sensor unit for H6D use.
There are two ways to format cards. The quickest way is to
use the Format card button on the grip but if you prefer, you
can also use the menu on the sensor unit.
FORMAT BUTTON
Press the Format button (A) on the camera grip. It is purposely
recessed to avoid unintentional use, so use a ballpoint pen
or similar. A dialogue is displayed on the sensor unit for
conrmation. It is also possible to press the format button with
a hard press with a ngertip.
FORMAT MEMORY CARDS VIA SENSOR UNIT
MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT CARD
1 Press MENU.
2 Navigate to General Settings > Storage.
3 Navigate to Format Card.
4 Click the button CFast or SD. SD in this case.
5 Conrm by pressing Format.
Swipe right or press MENU button to get back to Main Menu.
Note!
All CFast and SD memory cards should be formatted in the
sensor unit before using them the rst time.
Note!
Only UDMA/type 4/60MBs (or 400x) cards or better are
recommended for H6D use.
Format Card Dialogue
Conrmation Dialogue to Format SD Card.
Card to Format?
CFast SD
Exit
All content will be erased!
Format SD?
Exit Format
H6D www.hasselblad.com
USER GUIDE
To Use
126
Table of Content
A
GENERAL SETTINGS: STORAGE
Format CFast
Primary Image Slot:
Secondary Slot Usage:
Format SD
Format Card
Destination
SD
Backup