User Guide Version 160421 v1.
USER GUIDE Content 1 Introduction 8 1.1 1.2 1.3 9 10 11 System Requirements General Technical Specifications H6D-50c Technical Specifications 1.4 H6D-100c Technical Specifications 2 Safety 2.1 2.2 2.3 3 12 12 14 Warnings Cautions Disposal 15 15 16 Overview 17 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.
USER GUIDE 3.24 3.25 3.26 3.27 Rubber Eye Cup Accessory Connection PC Flash Connector Protective Baseplate Remove the Protective Baseplate Attach the Protective Baseplate 3.28 3.29 3.30 3.31 4 4.11 5.2 5.3 5.
USER GUIDE 5.
USER GUIDE 5.8 5.9 5.10 Temporarily Activated - Autofocus Retained 114 Activated by True Focus - Autofocus Deactivated 115 Activated by an Assigned Button - Manual Focus Retained 116 Camera Self Timer Camera Interval Settings Camera Bracketing Settings Bracketing Function 5.11 5.12 5.13 Camera Live View Settings 5.15 5.16 5.17 5.18 5.21 5.22 5.23 5.24 5.25 5.26 5.
USER GUIDE 5.28 Attach the Viewfinder 150 Adjust the Eyepiece 151 Change Focusing Screen 152 Preview, Histogram and Browsing 153 Preview Modes 153 Standard Preview 154 9 View Mode 154 Histogram Types 155 Histogram Mode 155 Capture Details Mode 155 Luminance Histogram Mode 155 Separate Histogram RBG Mode 155 Histogram Mode - Exposure 156 Browsing 157 Zoom in and out 5.29 5.
USER GUIDE 6 Accessories 6.1 6.2 6.3 6.4 6.5 7 7.4 172 173 174 HTS 1.5 174 CF Adapter 174 H 13, 26 and 52 Extension tubes 174 Converter H 1.
1 INTRODUCTION
Introduction 1.1 USER GUIDE SYSTEM REQUIREMENTS Storage and editing of images requires a certain minimum standard regarding computer capabilities. Large images require a reasonably high-performance computer with sufficient memory, advanced graphics capabilities and a recent operating system. It is recommended that the computer has a USB 3 connector, which will allow you to load images more quickly from the camera.
USER GUIDE Introduction 1.2 GENERAL TECHNICAL SPECIFICATIONS Camera Type Medium Format Digital SLR camera with Auto-focus, Auto-exposure, interchangeable Viewfinders and Lenses. Construction One piece stainless steel shell. Die-cast aluminium internal structure. Tripod sockets (1/4 and 3/8”) and quick coupling tripod plate for rapid mounting. Lenses Hasselblad HC/HCD lenses with built-in electronically controlled shutter and aperture. Automatic or manual focusing with instant manual focus override.
USER GUIDE Introduction 1.3 H6D-50C TECHNICAL SPECIFICATIONS Sensor type CMOS, 50 megapixels (8272 × 6200 pixels, 5.3 × 5.3 µm) Sensor dimensions 43.8 × 32.9mm Image size Stills: RAW 3FR capture 65MB on average. TIFF 8 bit: 154MB; Video: HD (1920 x 1080p) File format Stills: Hasselblad 3FR Video: H.264 Compressed (30 fps) Shooting mode Single shot stills, Video Colour definition 16 bit; Dynamic range approx.
USER GUIDE Introduction 1.4 H6D-100C TECHNICAL SPECIFICATIONS Sensor type CMOS, 100 megapixels (11600 × 8700 pixels, 4.6 × 4.6 µm) Sensor dimensions 53.4 × 40.0mm Image size Stills: RAW 3FR capture 120MB on average. TIFF 8 bit: 289MB; Video: HD (1920 x 1080p), UHD (3840 x 2160p) File format Stills: Hasselblad 3FR Video: H.
Introduction H6D USER GUIDE www.hasselblad.
2 SAFETY
Safety 2.1 WARNINGS Warning! Do not place cables between camera and computer so that there is a risk for people to trip and fall. This can cause personal injury and/or damage to the equipment. Warning! If you use spare battery packs, make sure to use protective caps on the contacts. The contacts can short-circuit and catch fire if not protected. This can cause personal injury and/or damage to the equipment.
USER GUIDE Safety Caution! Keep all equipment out of reach of small children. This will prevent damage to the equipment. Caution! When cleaning the camera, remove the batteries. This will prevent damage to the camera. Caution! If you leave the camera unused for a long period, remove the batteries. This will prevent damage to the equipment. Caution! Do not open the sensor unit. This can cause damage to the sensor unit. Caution! Do not cover the ventilation openings on the sensor unit.
3 OVERVIEW
Overview 3.1 USER GUIDE THE H6D INTERACTION DISPLAYS GRIP DISPLAY Front Scroll Wheel VIEWFINDER DISPLAY Rear Scroll Wheel SENSOR UNIT DISPLAY Viewfinder Display Sensor Unit Display This display is touch sensitive and you can use it in the same way you navigate on a smart phone. Swipe, select, pinch and spread to zoom for example. You can also navigate by using the 5 soft buttons under the display and scroll wheels on the Camera Grip.
USER GUIDE Overview 3.2 MAIN CAMERA PARTS VIEWFINDER GRIP WITH BATTERY SENSOR UNIT CAMERA BODY LENS LENS HOOD H6D www.hasselblad.
USER GUIDE Overview 3.3 PARTS, COMPONENTS, BUTTONS AND CONTROLS 1 2 3 4 5 Focus assist illuminator Mirror Up button Remote release port Stop Down button Battery grip All items mentioned on this page are described in greater detail elsewhere in this manual. 1 2 3 4 5 1 2 3 1 2 3 4 5 6 True Focus button Card Format button AE-L button Camera strap holder Grip lever release button Battery grip locking lever 4 5 6 1 Speaker 2 Product number 3 Sensor unit 1 2 3 H6D www.hasselblad.
USER GUIDE Overview 1 2 3 4 5 6 7 1 2 3 4 5 6 7 8 Integral flash Hot shoe Integral flash release PC connect port Lens release button Accessory port cover Camera strap lug Sensor unit release button 8 1 2 3 1 Exposure mode / metering mode button 2 Exposure compensation button 3 Eyesight adjustment wheel 4 CFast and SD card slot cover 5 Camera strap lug 4 H6D 5 www.hasselblad.
USER GUIDE Overview 1 1 2 3 4 5 6 7 8 9 10 2 3 4 5 6 7 Shutter release button Front scroll wheel White balance button AF button ISO button MENU and Video button Play/Browse mode ON / OFF button Hand strap lug Rear scroll wheel 8 9 10 1 Menu button - activates main menu 2 Soft button - function depends on screen information 3 Image rating button - rate image 1-5 stars or green/yellow/red. Also works as soft button.
Overview 3.4 USER GUIDE GRIP BUTTONS AND CONTROLS Note that some of the buttons have multiple functions according to the settings made. 1 2 1 Shutter release button This button has two positions. Press half-way (or softly) to activate the camera, auto focus function and exposure meter. Press all the way down (or more firmly) to release the shutter. The chosen exposure procedure and the self timer are also activated with this button.
USER GUIDE Overview 3.5 CAMERA BODY BUTTONS AND CONTROLS 1 True Focus button As default setting, this button activates True Focus (see separate section for description), but it also acts as a Zoomin button when browsing or as Selector button when making a setting change on the sensor unit, according to mode. This button can be programmed to have other functions. 1 2 3 2 CFast and SD Card format button This button displays the Format Dialogue on the Sensor Unit Display.
USER GUIDE Overview 3.6 SENSOR UNIT 1 MENU / (EXIT) button This button opens and closes the menu system. It is also used for other tasks (for example EXIT button) as you issue commands navigating the menu system. 2 Soft button This button is “delete image” in browse mode. Can also be soft button depending on screen information. 3 Image rating button Rate image 1-5 stars or green/yellow/red. Also works as soft button. (Only available in a later Firmware release).
USER GUIDE Overview 3.7 VIEWFINDER 1 2 3 4 5 1 Hot shoe Connection for automatic flash unit (with SCA 3902 adapter) or for wireless flash trigger. 2 Rubber eye cup Can be exchanged for another model. 3 Eyesight adjustment wheel The personal eyesight adjustment facility has a dioptre range of -5 to +3.5, to suit most users. 4 Exposure and flash compensation button Press this button to access the EV compensation screen. Flash settings are made with the front scroll wheel.
USER GUIDE Overview 3.8 LENSES 1 2 3 4 5 1 2 3 4 5 Lens shade index Manual focus ring Focusing distance scales Depth of field scales Lens index You can also download technical data sheets from the Hasselblad website, www.hasselblad.com, or you can download a combined version. You can also download a lens booklet that contains a round up of the available lenses and some general information. H6D www.hasselblad.
USER GUIDE Overview 3.
Overview USER GUIDE 3.10 SENSOR UNIT DISPLAY AND CONTROLS When shooting, the Sensor Unit can display the information most often required for a quick settings check. The unit’s buttons, grip scroll wheels and camera buttons together with the touch display are used to navigate the main menu and change settings. The touch display can show all saved captures on a CFast or SD card. You can Browse and Zoom the Captures for detailed inspection.
USER GUIDE Overview 3.11 GRIP DISPLAY TYPICAL GRIP DISPLAY White balance settings (Daylight) Focus mode (Single) ISO setting (ISO 200) Aperture setting (f/5.6) Shutter speed setting (1/250s) Exposure Value (EV) display (Displays EV, 13) Exposure mode indication (Aperture priority) Card - SD (S) or CFast (C). Displays SD card as primary storage.
USER GUIDE Overview 3.12 VIEWFINDER DISPLAY TYPICAL VIEWFINDER DISPLAY Viewfinder Display visual user interface Flash LED Exposure method indication (Manual mode) Warning triangle LED Aperture setting (f/3.2) Exposure compensation setting (+1.3 EV) Exposure compensation setting reminder symbol Shutter speed setting (1/20 seconds) 95 frames remaining Metering method setting (Spot) Focus Assist LED Note! The LED’s will only be visible when activated by the camera or a setting. H6D www.
USER GUIDE Overview VIEWFINDER DISPLAY ACCORDING TO SETTING Exposure and metering mode examples ISO (ISO 400) AF mode (AF-S) WB Exposure compensation mode M = Manual A = Aperture priority S = Shutter priority P = Program Pv = Program (variable) Center Weighted Center Spot Spot Exposure and metering mode examples M = Manual A = Aperture priority S = Shutter priority P = Program Pv = Program (variable) Center Weighted Center Spot Spot H6D www.hasselblad.
USER GUIDE Overview 3.13 RE-ASSIGNABLE GRIP BUTTONS FUNCTION OPTIONS These four grip buttons are by default assigned according to name but can be reassigned (in Main Menu > Camera Settings > Controls or in the Camera Configuration tool in Phocus) to various other functions listed here. 1 2 True Focus Temporarily activates True Focus function. AF-Drive Temporarily activates AF Drive. AE-L Temporarily locks a light reading in auto or manual modes. Also used in Zone metering. M.
USER GUIDE Overview 3.14 SHORT CUTS 1 Menu button – Setting option access. Press MENU button on the Sensor Unit. 1 2 Browse button – Starts image browse mode. 3 Shutter release button – Camera activation. Re-activates camera from Display Off mode. After making any changes, press EXIT (Menu button) or shutter release button to save the new setting. 2 3 4 5 4 Shutter release button – A half press always exits all menus and returns to shooting mode. 5 Front scroll wheel – Menu navigator / Browser.
Overview USER GUIDE 3.15 PHOCUS OVERVIEW Phocus Phocus is the Capture Processing and File Management application aimed primarily at Hasselblad 3F file handling. Phocus is available for both Mac and Windows. Professional Image Quality Phocus combines Hasselblad Natural Colour Solution (HNCS) with Digital Auto Correction (DAC) to provide high digital image quality in the images you create.
Overview USER GUIDE 3.16 CAMERA CONFIGURATION IN PHOCUS The Camera Configuration tool in Phocus offers a very thorough and secure way of creating comprehensive profiles for the H6D. There are three windows – Controls, Exposure and General – that present virtually all parameters to enable total control at the press of a button. This means that separate and specific custom profiles created in advance can cover a number of shooting scenarios. In addition these profiles can be easily imported and exported.
Overview USER GUIDE 37 3.17 BATTERY AND BATTERY GRIP Rechargeable battery grip The environmentally approved Battery grip Li-ion (3043357) is the standard power source for the H6D camera. The H6D requires a power supply for all actions as there is no mechanical reserve facility. It is therefore advisable to keep a reserve rechargeable battery grip at hand. As is the case with most batteries, problems might be encountered when used in very low temperatures.
USER GUIDE Overview 38 3.18 BATTERY CHARGER The battery charger is supplied with a number of plug attachments to suit various types of domestic electrical sockets available worldwide. Other types of socket will require a domestic socket converter. Attach the chosen plug by sliding it into position as in the diagram. Removal is by the reverse procedure.
USER GUIDE Overview RECHARGEABLE BATTERY GRIP SPECIFICATION LI-ION/ BATTERY CHARGER 3053572 BCH-2 – PRECAUTIONS and GENERAL The battery should be charged for approximately 6 hours before first time use. The battery should have a usable service life of around 400 recharge/discharge cycles. The battery must be charged at room temperature. Connect the battery grip to the camera correctly. Maximum battery capacity is reached only after the battery has been charged and discharged several times.
Overview USER GUIDE BATTERY LIFE AND BATTERY WARNING Battery life is dependent on a number of variable factors and therefore cannot be exactly predicted. If the camera is left in the active state instead of Display Off or Sleep modes for long periods, for example, then the battery will become exhausted much faster. A low camera battery state is indicated by a symbol on the grip display, in the viewfinder as well as on the sensor unit display. In addition, an audible signal sounds.
Overview USER GUIDE 3.20 POWER MODES MAIN MENU > GENERAL SETTINGS > POWER & TIMEOUT The H6D Camera can be set to automatically turn off the Sensor Unit Display after a set amount of seconds to save battery for example. It can also be set to Power Off after 5, 10 or 30 minutes. 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the Power and Timeouts icon. Swipe right or press Menu / EXIT button to get back to Main Menu.
Overview USER GUIDE 3.21 AUTOMATIC SETTINGS DISPLAY OFF MAIN MENU > GENERAL SETTINGS > POWER AND TIMEOUTS > DISPLAY OFF In this mode the camera turns off the grip and sensor unit displays but remains ready to be immediately reactivated to the ON mode. The time intervals are: 3, 5, 10, 20, 30, 60 seconds and Never.
Overview USER GUIDE 3.22 REMOVE AND ATTACH THE VIEWFINDER To remove, hold the viewfinder in the right hand and while pressing the viewfinder release button (1), lift the rear of the viewfinder up and away from the camera body (2). To attach, hold the viewfinder at a slight angle and rest it on the top of the camera. Slide the viewfinder forward until the front locating pin is in position in the recess in the front edge of the viewfinder screen aperture on camera body.
Overview USER GUIDE 3.23 EYEPIECE ADJUSTMENT No corrective lenses are needed to adjust the eyepiece to suit most requirements. The dioptre range is from -5 to +3.5D. Eyeglass wearers can rapidly and accurately change the settings according to whether they wish to wear eyeglasses for viewing or not. Personal eyepiece adjustments can be carried out by pointing the camera at the sky or similar smoothly toned area.
USER GUIDE Overview 3.25 ACCESSORY CONNECTION There are two accessory retaining screw threads (M5) as well as a data bus connector on the left hand side of the camera body, protected beneath a cover (1). 2 The cover can be removed by first lifting the left hand edge (1) a little and then sliding the cover to the left (2), as in the illustration. Lift the front edge of the cover first (1). 1 3.
Overview USER GUIDE 46 3.27 PROTECTIVE BASEPLATE REMOVE THE PROTECTIVE BASEPLATE A 1 To remove the protective base plate, lift the securing catch while pushing the plate towards the lens (A). ATTACH THE PROTECTIVE BASEPLATE B 1 To attach it again, slip it over the camera foot until it stops and the securing catch snaps into place (B). H6D www.hasselblad.
USER GUIDE Overview 3.28 MEMORY CARDS There are two types of memory cards that can be used with the H6D camera. 1 CFast card. 2 SD card. When using a CFast card or SD card, the H6D is completely self contained. No additional wires or connectors need to be attached. The recommended type is UDMA/type 4 /60MBs (400x) or better. Please see the Appendix in this manual for a list of recommended cards.
USER GUIDE Overview TO INSERT A MEMORY CARD Insert CFast card Open the CFast card cover (1) on the sensor unit by inserting a thumb in the recess and then sliding the slot cover backwards. Behind the cover, you will see a cover for the CFast card (2) and a cover for the smaller SD card (3). Hold the CFast card so that the connector holes face into the slot and you can read the brand label when you are behind the camera. 1 Gently press the CFast card into the slot.
USER GUIDE Overview TO REMOVE A MEMORY CARD Remove CFast card Open the memory card slot cover on the sensor unit (1). Press the CFast card (2) a little way in and then release it. As you do this, the card will be pushed out a few millimeters. Grab the card and pull it away from the sensor unit. Close the slot cover door. 1 Remove SD card Open the memory card slot cover on the sensor unit (1). Press the SD card a little way in and then release it. The SD card will then move out from the SD card slot (3).
USER GUIDE Overview FORMATTING MEMORY CARDS MAIN MENU > GENERAL SETTINGS > STORAGE A The camera is only able to read and write to storage media that have been formatted correctly. New cards sometimes have no formatting, or you might want to convert a card that is currently using a format that the camera cannot read. In either case, you must reformat both CFast cards and SD cards in the sensor unit for H6D use. There are two ways to format cards.
USER GUIDE Overview 3.29 CARRYING STRAP Carrying strap First withdraw the safety collar. The hook is then freed and can be attached to the strap lug. Slide back the safety collar to ensure the hook remains in the locked position between the small protruding lugs. The collar is purposely a tight fit to avoid unintentionally slipping back and therefore might need some effort to slide. H6D www.hasselblad.
Overview USER GUIDE 3.30 REMOVE THE CARRYING STRAP 1 Withdraw the safety collar. 2 Remove the opened hook from the strap lug. H6D www.hasselblad.
USER GUIDE Overview 3.31 CHANGE LENS ATTACH A LENS 1 Push the lens removal button (A) and remove protection cover lid (B) from the camera body. 2 Rotate the lens so that the red mark on the lens (C) lines up with the red mark (D) on the camera body. 3 Mount the lens into the camera body (E) and then turn the lens clockwise to lock its position. 4 Make sure the lens is locked to the camera body before using or moving the camera.
4 TO PREPARE
USER GUIDE To Prepare 4.1 CHECK THE DELIVERY VIEWFINDER GRIP WITH BATTERY SENSOR UNIT CAMERA BODY LENS LENS HOOD 1 Unpack all items. 2 Make sure that all the items listed on the attached package information are supplied. 3 Inspect all the items for damage. 4 If any items are missing or damaged, write down the product number of that item. If not, proceed to step 6. 5 Contact your Hasselblad dealer or distributor and tell them the product number of the item missing or damaged.
USER GUIDE To Prepare 4.2 REASSIGN GRIP BUTTONS These four grip buttons by default are assigned according to name but can be reassigned (in Main Menu > General Settings or in the Camera Configuration tool in Phocus) to various other functions listed here. 1 2 True Focus Temporarily activates True Focus function. AF-Drive Temporarily activates AF Drive. AE-L Temporarily locks a light reading in auto or manual modes. Also used in Zone metering. Self timer Sets self timer mode.
To Prepare 4.3 USER GUIDE CONNECT TO A COMPUTER 1 Connect a USB 3 cable to the USB port on the computer. 2 Open the hinged cover on the camera. 3 Connect the USB 3 cable to the USB port on the camera. Note! When connected to a computer, the following applies: ●● The destination medium and location are controlled from Phocus. ●● All exposure settings, including ISO, aperture and exposure time, are controlled from Phocus if you choose to expose from Phocus.
USER GUIDE To Prepare 4.4 CAMERA INTERVAL SETTINGS MAIN MENU > CAMERA SETTINGS > INTERVAL Camera Menu Interval Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Select the Interval Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Interval Settings Menu Active On / Off. Time Select time between exposures in minutes and seconds. Frames Select number of Frames. Initial Delay Select initial Delay.
USER GUIDE To Prepare 4.5 SET DATE AND TIME MAIN MENU > GENERAL SETTINGS > DATE AND TIME Main Menu General Settings Menu Date and Time Menu General Settings icon Set Date and Time 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the Date and Time icon. Swipe right or press Menu / EXIT button to get back to Main Menu. Date and Time Menu Settings Date Set Date by changing year, month and day using the pop up menus.
USER GUIDE To Prepare 4.6 SET LANGUAGE MAIN MENU > GENERAL SETTINGS > LANGUAGE Main Menu General Settings Menu Language Menu General Settings icon Language Menu Settings More language options will be added in a future Firmware release. Available Language: ●● English 1 Press MENU button on the Sensor Unit Display. 2 Navigate to General Settings. 3 Navigate to Language. 4 Select Language. 5 Close the pop up Menu by a click outside the pop up.
USER GUIDE To Prepare 4.7 SET BRIGHTNESS OF THE DISPLAY MAIN MENU > GENERAL SETTINGS > DISPLAY General Settings Menu Main Menu Display Menu General Settings icon Set Display Brightness 1 Press the Settings icon on the Sensor Unit Display. 2 The General Settings Menu will appear. 3 Select Display. Swipe right or press Menu / EXIT button to get back to Main Menu. Display Menu Settings Brightness Slide Left or Right to change Brightness. Show Preview Select On / Off.
USER GUIDE To Prepare 4.8 INSERT A MEMORY CARD (CFAST OR SD) There are two types of memory cards that can be used with the H6D camera. CFast card and SD card. Insert CFast card 1 Open the CFast and SD card slot cover on the sensor unit by pushing it to the left or towards the back of the camera. The slot cover will then rotate out 90 degrees. 2 Insert a thumb in the recess and then slide it to the left. Behind the cover, there is a slot for the CFast card (A).
USER GUIDE To Prepare 4.9 REMOVE A MEMORY CARD (CFAST OR SD) Remove CFast card 1 Open the CFast and SD card slot cover on the sensor unit (A) by pushing it to the left or towards the back of the camera. The slot cover will then rotate out 90 degrees. 2 Press the CFast card (B) a little way in and then release it. The CFast card will then move out from the CFast card slot (B). 3 Grab the card and pull it away from the sensor unit.
USER GUIDE To Prepare 4.10 FORMAT A CFAST CARD MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT The camera is only able to read and write to storage media that have been formatted correctly. New cards sometimes have no formatting, or you might want to convert a card that is currently using a format that the camera cannot read. In either case, you must reformat both CFast cards and SD cards in the sensor unit for H6D use. A There are two ways to format cards.
USER GUIDE To Prepare 4.11 SET DRIVE MODE There are two drive modes: Single drive and Continuous drive. Long press on ISO button (D) toggles between Single drive and Continuous drive mode. It can also be set from Main Menu or Control Screen. In Single mode, a capture is made when the shutter release button is pressed and the camera is made ready for the next capture. A To make the next capture however, you must first release the shutter release button and then press again.
5 TO USE
USER GUIDE To Use 5.1 NAVIGATING THE MENUS DESCRIPTION OF THE SENSOR UNIT MENU ITEMS The H6D Sensor Unit Screen is Touch Sensitive and you can swipe with one finger in different directions to move up, down, forward and backward through the user interface. Button Screen function 1 MENU / (EXIT) button Back to Main Menu 2 Soft button Up 3 Image rating button Select 4 Soft button Down 5 Browse button Go to image browse 1 MENU / (EXIT) button This button opens the Main Menu.
USER GUIDE To Use OVERVIEW OF MENUS AND SETTINGS ON SENSOR UNIT The Sensor Unit Display can be controlled directly on the touch sensitive screen by pressing the menus and icons. You can scroll up, down and from left to right as described in previous chapters.
USER GUIDE To Use TOUCH SCREEN NAVIGATION The Touch Screen on the H6D Sensor Unit is similar to a Phone or Tablet with touch sensitivity. The following gestures can be used to navigate and control the camera: Action Function Swipe Right Move back / Move image right. Swipe Left Move image left. Only in Browse mode. Swipe Down Display Control Screen. Swipe Up Hide Control Screen. Tap / Press Select action / button / setting. Double Tap Zoom in to 100%.
USER GUIDE To Use 5.2 SENSOR UNIT DISPLAY NAVIGATION MAIN MENU Main Menu In the Main Menu you will find the following options. 1 Camera Settings 2 Video Settings 3 General Settings Wi-Fi Live View mode Display Storage Exposure Focus Self Timer 1 + (Plus) Add your own function by selecting the + icon. 2 3 CONTROL SCREEN Display Control Screen Swipe down from the top of the display on the Sensor Unit Display or press the left soft button under the display you can always display the Control Screen.
USER GUIDE To Use CONTROL SCREEN DESCRIPTION The Control screen is a quick way to adjust settings. Tap / Select the desired function and change the setting directly in the Control Screen. Control Screen Locked Values on the Control Screen Control Screen P and Pv Mode When you select P or Pv, the Aperture (5.6) and Shutter (125) are automatic and displayed in grey colour that indicates that you cannot change these settings.
USER GUIDE To Use Settings on the Control Screen White Balance White Balance - Cloudy - Shade - Daylight - Tungsten - Flourescent - Flash - Manual AF Focus - AF-S Single Focus - AF-C Continuous Focus - AF-T True Focus - MF Manual Focus AF Focus ISO - Select ISO value. Aperture - Select Aperture value. ISO This Chapter continues on the next page. Aperture H6D www.hasselblad.
USER GUIDE To Use Settings on the Control Screen Shutter Shutter - Select Shutter value. Exposure Adjust - Adjust Flash Exposure by sliding right (+) or left (-). - Adjust Exposure by sliding right (+) or left (-). Exposure Mode - M Manual - A Aperture Priority - S Shutter Priority - P Program - Pv Program Variable Exposure Adjust Metering Mode - Center Weighted - Spot Weighted - Center Spot Weighted Exposure Mode This Chapter continues on the next page. Metering Mode H6D www.hasselblad.
USER GUIDE To Use Settings on the Control Screen Drive Mode Drive Mode - Single Drive Mode - Continuous Drive Mode Remaining Captures - Displays the number of remaining Captures. Memory Card - S for SD Card - C for CFast Card Remaining Captures Memory Card S - SD Card. C - CFast Card. H6D www.hasselblad.
USER GUIDE To Use 75 Settings on the Control Screen ADD AND REMOVE FAVOURITE FUNCTIONS TO CONTROL SCREEN Main Menu 1 Add a favourite function by selecting the + icon (1) on the Main Menu. 2 Remove a function from the Control Screen by a long press on the icon to be removed. 1 H6D www.hasselblad.
USER GUIDE To Use 5.3 CAMERA SETTINGS MENU Main Menu Camera Settings Menu Exposure Settings Menu Camera icon MAIN MENU > CAMERA SETTINGS Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Swipe right or press Menu / EXIT button to get back to Main Menu. H6D www.hasselblad.
USER GUIDE To Use 5.4 CAMERA EXPOSURE SETTINGS MAIN MENU > CAMERA SETTINGS > EXPOSURE Camera Menu Exposure Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Exposure Settings Increment Select the Increment setting. H6D www.hasselblad.
To Use USER GUIDE ISO AND WHITE BALANCE ISO and White Balance are set either via the Grip, the Sensor Unit Display or, when tethered, via Phocus. ●● On the grip, the WB (B) and ISO button (C) provides immediate access to ISO and White Balance settings. The front scroll wheel (A) and rear scroll wheel (D) are used to make the desired changes. These appears on the grip display, the sensor unit display and in the viewfinder.
USER GUIDE To Use ISO AND WHITE BALANCE ON GRIP ISO A 1 Press ISO button (D). 2 Turn the Front scroll wheel (A) to select ISO setting. B C D White Balance WB E 1 Press WB button (B). 2 Turn the Front scroll wheel (A) to select WB (Daylight, Shade, Cloudy, Flash, Fluorescent or Tungsten). 3 To set the Colour Temperature manually, scroll the Front Scroll Wheel until “M” is displayed. Then the colour temperature value is displayed at the bottom of the screen.
USER GUIDE To Use EXPOSURE SETTINGS MODES MAIN MENU > CAMERA SETTINGS > EXPOSURE Exposure Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Mode Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Here you can only select the Spot Mode and set True Exposure On or Off. To change the Exposure mode Swipe Down to display the Control Screen or press the EXP button on the Viewfinder.
USER GUIDE To Use MANUAL EXPOSURE MODE To change the Exposure mode Swipe Down to display the Control Screen or press the EXP button on the Viewfinder. Manual mode provides total user control of the shutter and aperture settings. In this mode the shutter speed and aperture settings are manually chosen by turning the front and rear scroll wheels. Exposure Modes Grip Display.
USER GUIDE To Use AUTOMATIC EXPOSURE MODE To change the Exposure mode Swipe Down to display the Control Screen or press the EXP button on the Viewfinder. Automatic exposure provides a choice of two ways to control the shutter speed and aperture settings semi-automatically and two ways fully automatically: Exposure Modes Grip Display. Aperture priority A The aperture is manually chosen by you by turning the front scroll wheel, and the shutter speed is automatically chosen by the camera.
To Use USER GUIDE AUTOMATIC EXPOSURE - P AND PV MODE H6D www.hasselblad.
USER GUIDE To Use AE-L BUTTON The AE-L button (A) has two main functions that can be incorporated in various working methods involving exposure locking. It also has an extra function for the flash measure capability (see AE-L section under Flash). The AE-L button can: A Lock an EV setting in manual and automatic modes When the button is pressed, the light metering facility is locked to the EV setting at that moment.
USER GUIDE To Use FIXED EXPOSURE COMPENSATION SETTING 1 Press the ‘±’ button on the viewfinder (A). 2 Turn the Front Scroll Wheel (B) to change the Flash compensation and the Rear Scroll Wheel (E) on the grip to increase or decrease the amount of Exposure Compensation in 1/3 EV steps.
USER GUIDE To Use LIGHT METER EXPOSURE MODE Exposure Settings Menu The Light Meter Exposure Mode can be changed on the Control Screen or by pressing the EXP button on the Viewfinder. Use the Rear Wheel to select. Different Light Metering Modes There are three reflective metering modes available. Center Weighted Center Spot Spot Light metering mode Description Center Weighted Used for light situations where there is no particular dominance of light or dark areas across the tonal range.
To Use TRUE EXPOSURE USER GUIDE Exposure Settings Menu MAIN MENU > CAMERA SETTINGS > EXPOSURE > TRUE EXPOSURE Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Select True Exposure Mode. Swipe right or press Menu / EXIT button to get back to Main Menu. True Exposure Settings Select On or Off. Determines whether the exposure is automatically adjusted to create a true exposure setting. On allows the adjustment.
To Use USER GUIDE True Exposure explained True Exposure is an HC/HCD lens function that allows the shutter speed to remain unaffected when stopping down. This effect is perhaps not so commonly understood as it is restricted specifically to integral lens shutters as opposed to focal plane shutters. When a lens is stopped down, the effective shutter speed becomes longer, consequently affecting the set exposure. At slow shutter speeds the effect is minimal but at faster speeds, e.g.
USER GUIDE To Use WHITE BALANCE SETTINGS - PRESETS AND MANUAL Camera Menu Exposure Settings Menu MAIN MENU > CAMERA SETTINGS > EXPOSURE > WHITE BALANCE Set Temperature in Manual White Balance: 1 2 3 4 Press Camera Settings. Choose Exposure. Choose White Balance. Set Temperature in Manual Mode. White Balance can only be set from the Control Screen or on the Grip Menu. White Balance Options There are six ‘White Balance’ presets plus a Manual setting to choose from.
To Use USER GUIDE WHITE BALANCE SETTING BY USING A “GREY CARD” There are two ways to make manual white/grey balance settings using a ‘Grey card’ or ‘Qp card’. If colour accuracy is not critical, you can use any neutrally coloured area or surface close to a mid grey value (concrete, overcast sky, or even white paper, for example). It won’t be perfect but just try to ensure that it is as neutral as possible in colour value.
USER GUIDE To Use EXPOSURE ADJUST Exposure Settings Menu MAIN MENU > CAMERA SETTINGS > EXPOSURE > EXPOSURE ADJUST Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Select Exposure Adjust. Swipe right or press Menu / EXIT button to get back to Main Menu. Exposure Adjust Exposure Adjust Increment: Select Step. Adjust the Exposure on the Control Screen 1 Swipe Down on the Sensor Unit Display to access the Control Screen.
USER GUIDE To Use EXPOSURE COMPENSATION / QUICK ADJUST The exposure compensation function, for both manual and automatic modes can be set from -5 to +5 EV, in 1/3, 1/2 or 1 EV increments and is visible above the scale in the viewfinder and as a ± symbol on the grip display. A The quickest way to make an adjustment in auto exposure mode is to use the rear scroll wheel (B). Temporary compensation setting in an auto-exposure mode using the Quick Adjust function: 1 Select auto exposure mode (A).
To Use USER GUIDE FLASH SETTINGS MAIN MENU > CAMERA SETTINGS > EXPOSURE > FLASH Exposure Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Select Flash. Swipe right or press Menu / EXIT button to get back to Main Menu. Flash Low Flash warning Select On or Off. Sync Select Flash Sync Settings. - Normal. - Rear. This Chapter continues on next page. H6D www.hasselblad.
To Use USER GUIDE FLASH AND STROBE SETTINGS The H6D can be used together with most flash units in manual mode. However, to make use of a TTL automatic function, it must ensured that the flash unit is compatible with the SCA 3002 system. Connection is either by the PC socket or by the hot shoe (see warning below). The viewfinder houses an integral fill-flash with a guide number of 12 and features OTF/TTL flash control.
USER GUIDE To Use ACCESS TO FLASH CONTROLS 1 Activate the camera and press the + / - button on the Viewfinder once. 2 Turn the Front scroll wheel (1) to set the amount of compensation required from +3 EV through -3 EV. 3 Turn the Rear Scroll Wheel (2) to set whether the flash is triggered just after the shutter opens or just before the shutter closes go to Camera Settings/Exposure/Flash and set Sync to Normal or Rear. 4 To set Flash Measure program a button in Camera Settings/ Controls to “Flash Measure”.
USER GUIDE To Use 96 INTEGRAL FLASH The integral flash unit features the following specifications: Guide no. 12 Coverage 56º horizontal, 44º vertical 1 Maximum light fall-off at side centres - 1EV (50%) Colour temperature (full flash) 5,000 – 5,600º K To raise the flash unit into its operative position, slide the flashback catch backwards in the direction of the flash symbol. To return the flash unit into its closed position, push down on the top of the back until it clicks back into place.
USER GUIDE To Use SEPARATE FLASH UNIT CONNECTION Separate flash units can be electrically connected either by way of the hot shoe accessory holder (see previous warnings) on the top of the viewfinder (1) or via a cord to the PC connection port (2) on the left hand side of the camera body. Slave unit switches / transmitters can also be connected on unit the (see specific user manuals for details). 1 Keep the plastic safety cover in place in the hot shoe (1) when not in use.
To Use USER GUIDE FLASH MEASURE OF SEPARATE FLASH UNIT You can measure the effect of an attached flash unit (with PC connected flash units and SCA3902 compatible flash units set to M mode), where the camera acts as a flash meter. The aperture setting can be adjusted and more trial exposures made until the information on the grip display is satisfactory. To use flash measure: 1 Assign a button as FLASH button. 2 Press the Assigned button on to access the flash option screen.
To Use USER GUIDE EXPOSURE LOCK MAIN MENU > CAMERA SETTINGS > EXPOSURE > EXPOSURE LOCK Exposure Lock Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Scroll down to Exposure Lock. Swipe right or press Menu / EXIT button to get back to Main Menu. Exposure Lock Flash Ready Select On or Off. Lens Select On or Off. If Lens is selected, it is not possible to expose without the Lens mounted. Out of Range Select On or Off.
To Use USER GUIDE AE-LOCK / QUICK ADJUST MAIN MENU > CAMERA SETTINGS > EXPOSURE > AE-LOCK / QUICK ADJUST AE-Lock / Quick Adjust Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Scroll down to AE-Lock / Quick Adjust. Swipe right or press Menu / EXIT button to get back to Main Menu. AE-Lock / Quick Adjust Reset after exposure Select On or Off. H6D www.hasselblad.
To Use USER GUIDE MIRROR SETTINGS MAIN MENU > CAMERA SETTINGS > EXPOSURE > MIRROR SETTINGS Mirror Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Select Mirror Settings. Swipe right or press Menu / EXIT button to get back to Main Menu. Mirror Settings Extra Mirror Delay Select Extra Mirror Delay Settings. - None - 25 ms - 50 ms - 100 ms - 200 ms Always Return Mirror Select On or Off. H6D www.hasselblad.
To Use USER GUIDE IMAGE ORIENTATION MAIN MENU > CAMERA SETTINGS > EXPOSURE > IMAGE ORIENTATION Image Orientation Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Exposure Settings Menu. Select Image Orientation Settings. Swipe right or press Menu / EXIT button to get back to Main Menu. Image Orientation Sets the viewing orientation of captures when they appear in Phocus.
USER GUIDE To Use 5.5 CAMERA FOCUS SETTINGS MAIN MENU > CAMERA SETTINGS > FOCUS Camera Menu Focus Settings Menu Select the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Focus Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Focus Settings Menu Contents Scan Settings for Scan Range (for Macro Lens only). - Near - Far - Full AF assist light Autofocus assist light. - Camera - Ext.
USER GUIDE To Use FOCUSING DISTANCE CALCULATION There are two distance scales (in feet and metres) visible through the window on the upper part of the lens barrel. The focusing distance is read off the chosen scale from the central lens index (A). A STOP DOWN / DEPTH OF FIELD PREVIEW A visual depth-of-field preview can be made by pressing the STOP DOWN button (B) while viewing the image in the viewfinder. Depth-of-field is calculated as follows: B 1 Focus the lens as required.
To Use USER GUIDE INFRARED FOCUS SETTING As infrared rays form an image at a plane different to that formed by visible light, the normal focus settings do not apply. Proceed as follows in manual focus mode: 1 Focus the lens. 2 Note the distance setting at the central lens index. 3 Realign this distance setting against the infrared mark (coloured red) instead of to the central lens index.
USER GUIDE To Use FOCUS ASSIST The camera also features a LED focus assist. Two arrowheads are displayed to the right of the viewfinder display (except for lenses with a maximum aperture of f/6.7 or smaller). The arrowheads provides confirmation of a precision focus setting and are a useful aid when making a setting with eyesight only.
USER GUIDE To Use MANUAL FOCUS A There is both a Manual focus mode setting and a manual override capability. B In Manual focus mode, focusing is carried out by rotating the focus ring on the lens. The focus setting remains until changed as with a conventional non-autofocus lens. This means that pressing the shutter release button will not activate a focus setting change as it does in autofocus. To change back to autofocus, press the AF button (B) and select AF-S, AF-C or AF-T.
To Use USER GUIDE AUTOFOCUS Autofocus modes Single Shot or Continuous are activated by pressing the shutter release to the half-press position. The operative range is from EV 1 to EV 19 at ISO 100. The point of focus is determined according to the vertical and horizontal areas (see illustration) within the central rectangular zone on the focusing screen. Alternatively, an attached flash unit that has a similar facility (a Metz 54/70, for example) can also be used. This feature can be altered in settings.
USER GUIDE To Use SINGLE SHOT FOCUS At Single Shot setting (AF S), the shutter release will be blocked until the camera finds the optimum focus setting. This ensures that no captures are made that are not finely focused. However, this delay is normally only a fraction of a second in good lighting conditions with a clear focusing pattern.
USER GUIDE To Use 5.6 CAMERA TRUE FOCUS The True Focus setting (AF-T) is generally used in specific circumstances to automatically correct for camera angle/focus setting discrepancies, but it can also be combined with other autofocus settings. AF-T True Focus Mode To exploit True Focus correctly, a few important points should be studied in order to obtain a full understanding of how and when to use it.
To Use USER GUIDE TRUE FOCUS AND ABSOLUTE POSITION LOCK The obvious situation that would most benefit from using True Focus would be a fashion shoot with a fairly wide angle lens at a large aperture setting and where the central area of the image is clothing while retaining focus on the model’s face. Ideally a fairly controlled and static flow should be planned. A change of pose by the model should take place only after captures.
To Use USER GUIDE TRUE FOCUS AND CAMERA HANDLING To obtain the maximum benefit from True Focus work within the requirements of the system. This might need a little practice but it will improve the accuracy of the measurements and thereby provide better results. 1 Remain as still as possible when making the first True Focus measurement and wait for the audio signal or ready light to show green again before continuing. This will not only speed up the process but also increase accuracy.
To Use 5.7 USER GUIDE CAMERA TRUE FOCUS METHODS ACTIVATED BY SHUTTER RELEASE - TRUE FOCUS RETAINED MAIN MENU > GENERAL SETTINGS > CAMERA > TRUE FOCUS A In this mode the Autofocus function is effectively converted into the True Focus function. Focus is set by half pressing the shutter release button (A). 1 2 3 4 On the Sensor Unit Display, select Camera Settings. Select Focus. Select True Focus in AF-S On. Aim camera to the important area of the subject and half press the shutter release button (A).
To Use USER GUIDE TEMPORARILY ACTIVATED - AUTOFOCUS RETAINED MAIN MENU > GENERAL SETTINGS A In this mode the True Focus function is activated by pressing an assigned button. This produces a ‘one-shot’ setting where the camera reverts to its original Autofocus setting after capture. Useful if you want to quickly switch back and forth between True Focus and normal Autofocus. 1 Program the buttons in the Main Menu on the Sensor Unit Display.
To Use USER GUIDE ACTIVATED BY TRUE FOCUS - AUTOFOCUS DEACTIVATED A In this mode the True Focus function is activated by pressing the True Focus button. Normal autofocus is de-activated, therefore pressing the shutter release button will not reset the focus. This method is useful when many shots are required with the same focus setting. B C 1 Press AF button (C). Select True Focus with the Front scroll wheel (B). Save. 2 Aim camera to the important area of the subject and press True Focus button (F).
USER GUIDE To Use ACTIVATED BY AN ASSIGNED BUTTON - MANUAL FOCUS RETAINED A In this mode the True Focus function is activated by pressing an assigned button. This produces a ‘one-shot’ setting where the camera reverts to its original Manual focus setting after capture. Pressing the shutter release button (A) will not reset the focus. This method is useful when many shots are required with the same focus setting.
USER GUIDE To Use 5.8 CAMERA SELF TIMER MAIN MENU > CAMERA SETTINGS > SELF TIMER Camera Menu Self Timer Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Self Timer Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Self Timer Settings Menu Active On / Off Time Select time in seconds. Select between 2 - 60 seconds. Sequence Delay / Mirror Up. Mirror Up / Delay.
USER GUIDE To Use 5.9 CAMERA INTERVAL SETTINGS MAIN MENU > CAMERA SETTINGS > INTERVAL Camera Menu Interval Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Select the Interval Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Interval Settings Menu Active On / Off. Time Select time between Exposures in minutes and seconds. Frames Select number of Frames from 2 - 99 or no limit. Initial Delay Select initial Delay.
USER GUIDE To Use 5.10 CAMERA BRACKETING SETTINGS MAIN MENU > CAMERA SETTINGS > BRACKETING Camera Menu Bracketing Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Bracketing Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. 0,+,-- Bracketing Settings Menu Active On / Off. Amount Select Amount of Bracketing. Frames Select number of Frames. Parameter Aperture or Shutter speed.
USER GUIDE To Use 5.11 CAMERA LIVE VIEW SETTINGS MAIN MENU > CAMERA SETTINGS > LIVE VIEW Camera Menu Live View Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Live View Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Self Live View Settings Menu Start Start Live View Mode. This Chapter Continuous on the next page. H6D www.hasselblad.
USER GUIDE To Use LIVE VIEW This feature is useful for accurate focusing, composition and depth of field preview. 1 2 3 4 5 Select Camera Settings > Live View. Press Start to activate Live View. Press button D to toggle overlay forward. Press button B returns on step. Button A, C, and E to Exit Live View. Live View Settings A B C D E Overlay Select Overlay Displayed during Live View. Scroll between options with button (B) and (D).
To Use USER GUIDE LIVE VIEW WITH HDMI EXTERNAL SCREEN Connect an external Video Screen via HDMI. Note! Live View demands higher power consumption than normal operation. Working with Live View will shorten the usage time of the Camera when on battery only power supply. H6D www.hasselblad.
USER GUIDE To Use 5.12 CAMERA CONTROLS SETTINGS MAIN MENU > CAMERA SETTINGS > CONTROLS Camera Menu Controls Settings Menu Press the Camera icon on the Sensor unit display. The Camera Settings Menu will appear. Press the Controls Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. Camera Controls Settings Menu Camera Body Top Front Wheel -Aperture Shutter Speed Normal Aperture Normal Light Meter Allows choice of aperture indication display (in Manual mode only).
USER GUIDE To Use 5.13 VIDEO SETTINGS MENU Main Menu Video Settings Menu Video Quality Settings Video icon MAIN MENU > VIDEO SETTINGS Press the Video icon on the Sensor unit display. The Video Settings Menu will appear. Select the Video Settings Menu. Swipe right or press Menu / EXIT button to get back to Main Menu. VIDEO SETTINGS In this release it is not possible to change the Coding or Resolution Settings. In a future firmware release there will be more options. Coding Video Quality Coding Settings.
USER GUIDE To Use 5.14 VIDEO QUALITY SETTINGS MAIN MENU > VIDEO SETTINGS > VIDEO QUALITY Video Settings Menu Video Quality Settings Press the Video icon on the Sensor unit display. The Video Settings Menu will appear. Press the Video Quality icon. Swipe right or press Menu / EXIT button to get back to Main Menu. VIDEO QUALITY SETTINGS In this release it is not possible to change the Coding or Resolution Settings. In a future firmware release there will be more options. Video Coding H.264 Video Coding.
USER GUIDE To Use 5.15 VIDEO RECORDING To Record Video 1 Enter Video mode by a long press on the Video icon (1) on the Grip Display. 2 The Video Control Screen is displayed. 3 Start the Live Video Stream by pressing the Live Video icon. 4 The Video Stream is displayed on the Sensor Unit Display. 5 Start Recording by pressing the Exposure Trigger Button (2) or by pressing the red recording icon on the sensor unit display.
USER GUIDE To Use 5.16 GENERAL SETTINGS MENU Main Menu General Settings Menu Wi-Fi Settings Menu General Settings icon MAIN MENU > GENERAL SETTINGS Press the Settings icon on the Sensor unit display. The General Settings Menu will appear. Swipe right or press Menu / EXIT button to get back to Main Menu. Wi-Fi Settings Menu Options There are 2 options: - 2.4 GHz. - 5 GHz. Continues on the next Page. H6D www.hasselblad.
To Use USER GUIDE GENERAL SETTINGS WI-FI Wi-Fi Settings Menu The Wi-Fi mode allows the Hasselblad Phocus Mobile application on an Apple iPhone, iPad or iPod to function in the same way as when a camera is tethered to a computer. MAIN MENU > GENERAL SETTINGS > WI-FI 1 Press MENU. 2 Select General Settings in the main menu on the Sensor Unit Display. 3 Select Wi-Fi. 4 Settings: Wi-Fi: On or Off Modes: 2.4 GHz or 5 GHz. Note! Some regions do not allow 5 GHz Wi-Fi.
USER GUIDE To Use 5.17 GENERAL SETTINGS DISPLAY MAIN MENU > GENERAL SETTINGS > DISPLAY General Settings Menu Display Menu 1 Press the Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Select Display. Swipe right or press Menu / EXIT button to get back to Main Menu. Display Menu Settings Brightness Slide Left or Right to change Brightness. Show Preview Select On / Off. On displays a preview of the capture after every exposure. H6D www.hasselblad.
USER GUIDE To Use 5.18 GENERAL SETTINGS STORAGE MAIN MENU > GENERAL SETTINGS > STORAGE General Settings Menu Storage Menu 1 Press the Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings Storage icon. Swipe right or press Menu / EXIT button to get back to Main Menu. Storage Menu Settings Format Card - Format CFast. - Format SD. Image Destination - Primary slot: CFast or SD. - Secondary slot usage. Format Card Select Card to Format.
USER GUIDE To Use FORMAT CFAST AND SD CARDS MAIN MENU > GENERAL SETTINGS > STORAGE > FORMAT CFast A The camera is only able to read and write to storage media that have been formatted correctly. New cards sometimes have no formatting, or you might want to convert a card that is currently using a format that the camera cannot read. In either case, you must reformat both CFast cards and SD cards in the sensor unit for H6D use. There are two ways to format cards.
USER GUIDE To Use IMAGE AND VIDEO DESTINATION MAIN MENU > GENERAL SETTINGS > STORAGE > IMAGE DESTINATION General Settings Menu Storage Menu Destination Settings. 1 Press the Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings Storage icon. 4 Select Image Destination. Swipe right or press Menu / EXIT button to get back to Main Menu. Image Destination - Primary slot: CFast or SD. - Secondary slot usage: - None. - Overflow.
USER GUIDE To Use 5.19 GENERAL SETTINGS DATE AND TIME MAIN MENU > GENERAL SETTINGS > DATE AND TIME General Settings Menu Date and Time Menu 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the Date and Time icon. Swipe right or press Menu / EXIT button to get back to Main Menu. Date and Time Menu Settings Date Set Date by changing year, month and day using the pop up menus. Time Set Time by changing hour and minute using the pop up menus.
USER GUIDE To Use 5.20 GENERAL SETTINGS POWER AND TIMEOUTS MAIN MENU > GENERAL SETTINGS > POWER AND TIMEOUTS General Settings Menu Power and Timeouts Menu The H6D Camera can be set to automatically turn off the Sensor Unit Display after a set amount of seconds to save battery for example. It can also be set to Power Off after 10, 30 or 60 minutes. 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings Power and Timeouts icon.
To Use USER GUIDE SET DISPLAY OFF MODE MAIN MENU > GENERAL SETTINGS > DISPLAY >POWER MODES AND TIMEOUTS 1 2 3 4 Press the General Settings icon on the Sensor unit display. The General Settings Menu will appear. Press the General Settings Power and Timeouts icon. Select Display Off. In this mode the camera turns off the grip and sensor unit displays but remains ready to be immediately reactivated to the ON mode. The time intervals are: ●● 10 seconds. ●● 20 seconds. ●● 30 seconds. ●● 60 seconds. ●● Never.
USER GUIDE To Use 5.21 GENERAL SETTINGS LANGUAGE MAIN MENU > GENERAL SETTINGS > LANGUAGE General Settings Menu Language Menu 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings Language icon. Swipe right or press Menu / EXIT button to get back to Main Menu. Language Menu Settings More language options will be added in a future Firmware release. Available Language: ●● English 1 Press MENU button on the Sensor Unit Display.
USER GUIDE To Use 5.22 GENERAL SETTINGS SERVICE MAIN MENU > GENERAL SETTINGS > SERVICE General Settings Menu Service Menu 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings Service icon. Swipe right or press Menu / EXIT button to get back to Main Menu. Service Menu Settings Check For Update Log Data Press Save to Log Data for Service. Demo Mode Deactivate Storage: Select the check box and a dialogue screen is displayed.
USER GUIDE To Use 5.23 GENERAL SETTINGS CHECK FOR UPDATE MAIN MENU > GENERAL SETTINGS > CHECK FOR UPDATE General Settings Menu Check for Update Menu 1 Press the Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings Check for Update button. Swipe right or press Menu / EXIT button to get back to Main Menu. Check for Update Menu Settings When connected to internet you can check for Firmware Upgrades. H6D www.hasselblad.
USER GUIDE To Use 5.24 GENERAL SETTINGS ABOUT MAIN MENU > GENERAL SETTINGS > ABOUT General Settings Menu About Menu 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Press the General Settings About icon. Swipe right or press Menu / EXIT button to get back to Main Menu. Firmware The About box will tell you which firmware version is present so you can see if you have the latest firmware (can be downloaded from the Hasselblad website).
USER GUIDE To Use 5.25 GRIP DISPLAY NAVIGATION A BUTTONS AND CONTROLS ON GRIP DISPLAY B Press the buttons that surrounds the display and turn the scroll wheels to navigate the menu and access the settings on the grip. Note that some of the buttons have several functions which is indicated by the designation that appears closest to that particular button when navigating. For example, the Menu button (F) also acts as a Video button. The Play button (G) also acts as Illumination On for the Grip Display.
To Use USER GUIDE TO ADJUST SHUTTER AND APERTURE ON GRIP Note! In manual mode both the shutter and aperture are electronically controlled and are adjusted by the scroll wheels on the grip. A Note! There are no separate manual setting rings on the lenses or camera body. The settings are displayed both on the grip display and in the viewfinder display. How to adjust shutter and aperture 1 Turn the front scroll wheel (A) to adjust the shutter and aperture.
USER GUIDE To Use GRIP DISPLAY NAVIGATION Main Screen This is the Main Screen of the Camera Grip Display. These are the most important camera settings. The top row displays WB, AF and ISO. The middle displays Aperture, Shutter Speed, EV (Exposure Value) and Exposure Compensation values are displayed. At the bottom of the screen Exposure Mode, Light Meter Method, Drive Mode, Battery Level, Exposure Counter and Status of the memory cards are displayed.
USER GUIDE To Use Auto Focus (AF) Press the AF button above the Grip Display to show the AF menu. Select AF mode by scrolling the Front Scroll Wheel left or right until the desired mode is selected. Auto Focus (AF) with Macro Lens 120mm When the 120mm Macro Lens is used the AF menu displays an additional setting – Focus Range. To limit the large focus range of the Macro Lens can improve the AF performance significantly. It is possible to select one of the three modes below for Focus Range.
USER GUIDE To Use +/- Button on Viewfinder Press the +/- button on the Viewfinder to reach the Exposure Adjust menu. Use the Front Scroll Wheel to set the exposure compensation for flash and the rear wheel to set the exposure compensation. The exposure compensation can be set between -5.0 and 5.0 stops and the flash compensation between -3.0 and 3.0 stops. Leave the menu by half press or by pressing the +/- button again.
USER GUIDE To Use 5.26 VIEWFINDER DISPLAY NAVIGATION TYPICAL VIEWFINDER DISPLAY Viewfinder Display Visual User Interface Flash LED Exposure method indication (Manual mode) Warning triangle LED Aperture setting (f/3.2) Exposure compensation setting (+1.3 EV) Exposure compensation setting reminder symbol Shutter speed setting (1/20 seconds) 95 frames remaining Metering method setting (Spot weighted) Focus Assist LED Note! The LED’s will only be visible when activated by the camera or a setting.
USER GUIDE To Use VIEWFINDER DISPLAY NAVIGATION OVERVIEW A How to Navigate the Viewfinder Display Select WB, AF, or ISO near the Grip Display or Exposure Compensation mode and Exposure and Metering Modes on the right side of the Viewfinder. 1 Turn the front scroll wheel (A) to adjust settings. 2 Turn the rear scroll wheel (B) to adjust settings.
To Use USER GUIDE VIEWFINDER DISPLAY EXAMPLES Main Menu This is the Main Menu Screen of the Viewfinder Display. It shows the most important exposure information. To the left the exposure mode is displayed, Manual Mode in this case. The scale with an arrow shows the exposure compensation setting. In the center of the display the aperture and shutter speed are displayed. If an exposure compensation is set, a sign with a plus and minus is displayed between the aperture and shutter speed value.
USER GUIDE To Use Exposure settings Press the EXP button on the Viewfinder to display the Exposure Mode and Light Meter Mode menu. Set the Exposure Mode using the Front Scroll Wheel and the Light Meter Mode using the Rear Scroll Wheel. Leave the Menu by half-pressing or by pressing the EXP button again. Front Scroll Wheel Rear Scroll Wheel Exposure settings, Manual mode selected.
To Use USER GUIDE Autofocus Settings Press the AF button above the Grip Display to show the AF menu. Select AF mode by scrolling the Front Scroll Wheel left or right until the desired mode is selected. Autofocus Settings, AF-S selected. AF with Macro 120mm When the 120mm Macro Lens is used the AF menu displays an additional setting – Focus Range. It is possible to select one of the three modes below for Focus Range. The first limits the AF to scan only the close-up range (less than 1 meter).
USER GUIDE To Use 150 5.27 REMOVE / ATTACH VIEWFINDER REMOVE THE VIEWFINDER Caution! Be careful when you attach/detach the components to/from the camera. This will help prevent damage to the data bus connections. Caution! Use the grip or strap when you lift and handle to camera. This will help prevent damage to the camera. 1 Hold the Viewfinder in your right hand. 2 Press and hold down the Viewfinder release button (A). 3 Lift the rear of the Viewfinder up and away from the camera body.
USER GUIDE To Use ADJUST THE EYEPIECE No corrective lenses are needed to adjust the eyepiece to suit most requirements. The dioptre range is from -5 to +3.5D. Eyeglass wearers can rapidly and accurately change the settings according to whether they wish to wear eyeglasses for viewing or not. 1 Hold the camera in your left hand. 2 Point the camera at the sky or a similar smoothly toned area.
To Use USER GUIDE CHANGE FOCUSING SCREEN The H6D is fitted with a Spherical Acute-Matte D Focusing Screen for extreme brightness, clarity and even illumination. An optional accessory screen with a grid pattern is also available. To change the Focusing Screen, remove the viewfinder to access the Focusing Screen. To remove the screen, place the tip of a ballpoint pen or similar in the Focusing Screen removal lug and pull upwards.
USER GUIDE To Use 5.28 PREVIEW, HISTOGRAM AND BROWSING PREVIEW MODES Use the Rear Scroll Wheel to scroll through the available preview modes when in Browse Mode or single click on the Meta Data information to change Preview Mode. ●● Standard Preview: Displays a Preview Image with the most important settings. Note that the information covers some of the image. Go to Full Screen mode to see the complete Capture area. ●● Histogram: Displays a Preview Image with a Histogram.
USER GUIDE To Use 154 STANDARD PREVIEW The Standard Preview is displayed when you first turn on the camera and is probably the view you will use most often. 1 2 3 It displays a preview of your most recent capture and basic information about the settings. 4 5 1 2 3 4 5 6 Card (S for SD) Capture Date Capture Time Aperture (f/8) Shutter Speed (60) 7 8 6 ISO Setting (100) 7 +/- Exposure Adjust Indicator 8 Exposure Adjust (0.
USER GUIDE To Use HISTOGRAM TYPES There are different types of Histogram representations available. Histogram Mode, Capture Details Mode, Combined Histogram Mode and Separate Histogram RGB Mode. HISTOGRAM MODE LUMINANCE HISTOGRAM MODE Histogram mode displays RGB Histogram with separate RGB channels visible. The RGB details are stored with the capture file, and can be referred to in Phocus and other applications. In Luminance Histogram mode, the RBG channels displays the the luminosity Histogram.
USER GUIDE To Use HISTOGRAM MODE - EXPOSURE Underexposure Even exposure Overexposure Histogram Exposure The Histogram provides a graph that indicates the total number of pixels at each brightness level, with brightness in range from black on the left to white on the right. It is a valuable tool for evaluating captures. A well exposed shot usually has a full range of levels, while underexposed and overexposed Captures tend to show levels concentrated at the left or right part of the scale.
USER GUIDE To Use BROWSING Press Play button (B) on the Grip Display or on the Sensor Unit (G) to enter Browse mode. A In Browse mode use the Front Scroll Wheel on the Grip (A) to Browse captures in a folder. B In Browse mode on the Sensor Unit Menu, swipe right or left to Browse captures. Delete Capture with the Soft Button (D). Zoom out to Folder View to select another folder to Browse. Browse button (B) and (G) Starts display and shows the last image. The user can review images, browse and zoom.
USER GUIDE To Use ZOOM IN AND OUT The Touch Screen on the H6D Sensor Unit is similar to a Phone or Tablet with touch sensitivity. The following gestures can be used to navigate and control the H6D Camera: Zoomed View Function Action Zoom in Spread (move two fingers apart). Zoom out Pinch (move two fingers together). Select Move back Tap / Press with one finger. Swipe right. Display Control Screen Swipe down from the top of the screen. Hide Control Screen Swipe up.
USER GUIDE To Use 5.29 PHOCUS Phocus is the Capture Processing and File Management application aimed primarily at Hasselblad 3F file handling. Phocus Mobile offers remote viewing and control when shooting tethered. Phocus mobile is free to download at the APPLE App Store for both iPhone and iPad. FEATURES IN PHOCUS Professional Image Quality ●● Hasselblad Natural Colour Solution (HNCS). ●● Lens corrections for H and V system lenses (DAC). Specialized Tools ●● Advanced Tethered Camera Controls.
To Use USER GUIDE PHOCUS AND HASSELBLAD CAPTURE FILES The H6D can capture files and store them as Hasselblad RAW format files or Hasselblad RAW + JPEG formats simultaneously. (not applicable to 60 Mpix / 50MS/200MS models). Hasselblad RAW files are initially stored in the 3FR format which is a proprietary Hasselblad format for the temporary storage of captures. A 3FR file contains the complete digitized raw image exactly as it was captured by the camera.
USER GUIDE To Use 5.30 LENSES AND FOCUS MODES REMOVE THE LENS Caution! Be careful when you attach/detach the components to/from the camera. This will help prevent damage to the data bus connections. A Caution! Do not insert fingers into the camera body. This can cause damage to the equipment. B C 1 Hold the lens with one hand and hold the camera body (A) still. 2 Push the lens removal button (B). 3 Rotate the lens counter clockwise. 4 Push the lens (C) away from the camera body.
USER GUIDE To Use ATTACH THE LENS Caution! Be careful when you attach/detach the components to/from the camera. This will help prevent damage to the data bus connections. Caution! Do not insert fingers into the camera body. This can cause damage to the equipment. 1 Push the lens removal button (A) and remove protection cover lid (B) from the camera body. 2 Rotate the lens so that the red mark on the lens (C) lines up with the red mark (D) on the camera body.
To Use USER GUIDE REMOVE THE LENS CAP 1 Insert thumb and index finger into the recesses (A). 2 Pinch the recesses (A) together. 3 Remove the front lens cap. A A ATTACH THE LENS CAP 1 Insert thumb and index finger into the recesses (A). 2 Attach the front lens cap on the lens until it snaps into place. A A H6D www.hasselblad.
USER GUIDE To Use REMOVE THE LENS SHADE All lenses are supplied with lens shades that additionally provides extra protection for transport and storage when mounted in reverse. 1 Turn the lens shade (A) counter-clockwise. 2 Remove the lens shade (A). A ATTACH THE LENS SHADE All lenses are supplied with lens shades that additionally provides extra protection for transport and storage when mounted in reverse. 1 Place the lens shade on the lens.
To Use USER GUIDE FILTERS The filters have a threaded fitting (67/77/95 mm, according to lens) and are rotated clockwise into place. As there is no rotation of the front section of the lens when the focus is changed, the filter do not rotate either. This is particularly useful when using polarizing or graduated filters where the orientation is critical. H6D www.hasselblad.
To Use USER GUIDE TO SET FOCUS DISTANCE 1 Estimate the distance to the target. 2 Inspect the focus distance scale (A) and turn the manual focus ring (B) to adjust the focus distance. Note! There are two distance scales (in feet and metres) visible through the window on the upper part of the lens barrel. B A A H6D www.hasselblad.
To Use USER GUIDE 167 5.31 BATTERY CHARGE THE BATTERY Note! The battery will become fully charged after approximately 6 hours before first use. 1 Remove the battery from the camera (A). 2 Insert the jack plug from the battery charger into the socket on the battery grip (B). 3 Insert the battery charger into a standard (100–240V~/50– 60 Hz) domestic socket. A During the charging procedure, the lamp on the charger shows the following: ●● Standby (no battery connected) ●● Charging ●● Ready B H6D www.
To Use USER GUIDE CHECK THE BATTERY STATUS 1 On the Sensor Unit Menu Control Screen select the Battery symbol in the upper right corner. Low battery warning The Grip Screen displays: ●● The firmware version (A). ●● The number of captures taken since the last battery recharge/change (B). ●● A rechargeable-battery status icon (C) that provides a quick visual check as well as a figure estimate in percent.
To Use USER GUIDE 5.32 PROTECTIVE BASEPLATE REMOVE THE PROTECTIVE BASEPLATE 1 Lift the securing catch while pushing the plate towards the lens. ATTACH THE PROTECTIVE BASEPLATE 1 Slip it over the camera foot until it stops and the securing catch snaps into place. H6D www.hasselblad.
To Use USER GUIDE 5.33 STORE THE CAMERA Caution! Before you connect the sensor unit to the H6D camera after storage, always replace the protective CMOS/filter cover. This will prevent damage to the equipment. Caution! If you leave the camera unused for a long period, remove the batteries. This will prevent damage to the equipment. Caution! Keep camera and equipment away from moisture. If your camera becomes wet, disconnect from electric power and let camera dry before further use.
6 ACCESSORIES
USER GUIDE Accessories 6.1 ACCESSORIES CONNECTIVITY DIAGRAM Optional viewfinders Tilt / shift HTS 1.5. For use with HCD28, HC35, HC50, HC80 and HC100 (including extension tubes). HV 90x / HVD 90x-II viewfinders HVM waist-level viewfinder Optional viewfinders Optional V system Lenses CF lens adapter GIL GPS Viewfinder (included). Type depends on model receiver SCA3902 TTL Flash Adapter All HC/HCD lenses, including extension tubes and converters Roll film and Instant mag.
USER GUIDE Accessories 6.2 HC LENS RANGE HCD 4.8/24mm HCD 4/28mm HC 3.5/35mm HC 3.5/50-IImm HC 2.8/80mm HC 2.2/100mm HC Macro 4/120-IImm HC 3.2/150mm HC 4/210mm HC 4.5/300mm HC 3.5–4.5/50–110mm HCD 4.0–5.6/35–90mm V system C type lenses with optional CF lens adapter H6D www.hasselblad.
Accessories 6.3 USER GUIDE OPTIONAL HC LENS ACCESSORIES HTS 1.5 (3043400) The HTS 1.5 is a tilt and shift adapter designed for the HCD28mm, HC35mm, HC50mm, HC80mm and the HC100mm lenses. It not only solves technical challenges but also provides exciting opportunities for creative solutions. CF ADAPTER (3043500) The CF adapter allows almost all lenses from the V-system to be used on H system camera bodies.
Accessories 6.4 USER GUIDE OPTIONAL ACCESSORIES HVM WAIST LEVEL VIEWFINDER (3053328) The HVM waist level viewfinder allows a comfortable lower viewing angle either for effect or where eye contact with the subject is desirable in portrait photography, for example. Autofocus function of all lenses fully retained. Intended for horizontal format shooting and not suitable for vertical format use.
Accessories USER GUIDE FLASH ADAPTER SCA 3902 (3053393) For connecting flashes compatible with the SCA 3002 system to the Hasselblad H6D. UV-SKY FILTERS Absorbs UV radiation and reduces blue haze without affecting colours. Also protects the front lens surface. Particularly recommended when the camera is used in harsh conditions. Available in three sizes to suit various lenses. 67mm: 3053470, 77mm: 3053474 and 95mm: 3053478 POLA FILTERS Reduces non-specular reflections and glare.
Accessories USER GUIDE RELEASE CORD H (3043370) Remote release cord with a cable length of 0.5 m. HVM CORRECTION LENS HOLDER (3053348) Lens holder for custom made eyesight correction (lenses available from opticians). To be used for optimal viewing comfort and accuracy. HVD 90X / HV 90X & 90X-II VIEWFINDERS (3053330, 3053326, 3053334) 90 degrees reflex viewfinder, providing 100% field of view even when wearing eyeglasses. Includes built-in fill flash and multimode light metering system.
Accessories 6.5 USER GUIDE 178 HM 16-32 FILM MAGAZINE The Hasselblad HM 16-32 film magazine is a sophisticated semi-independent unit within the H system. It has its own power supply for individual information storage, LCD panel, illumination, etc.
Accessories USER GUIDE LCD Panel The various functions are accessed by repeatedly pressing the function selector button (loop menu) and changes made by the ‘change-up’ and ‘change-down’ buttons. Any settings are automatically saved. At very low temperatures the LCD will require a few seconds to display new settings. LCD illumination button The LCD can be illuminated by pressing the display illumination button, which is accessible when the magazine is not attached to the camera.
Accessories USER GUIDE Change Up / Change Down Button Can alter the settings ‘upwards’. For example, to increase the film speed setting. Toggle action. Can alter the settings ‘downwards’. For example, to decrease the film speed setting. Toggle action. Function Selector Selects the four functions that can be changed on the magazine. The functions are on a menu loop so that repeated pressing of the selector button will successively access all functions in turn.
Accessories USER GUIDE Film Tab Holder Holds an ID tab from the film roll pack as a reminder of the type of film loaded. Remember to change it if you change film type! Film Holder Key Secures the film holder in the magazine. Fold out the key and turn counter-clockwise 90° to remove the film holder and turn clockwise 90° to lock the film holder in place. Magazine Settings Lock All settings can be locked to avoid inadvertent changes.
USER GUIDE Accessories Attach and Remove the Magazine You cannot remove a magazine from the camera body if the magazine dark slide is not in place, (when the magazine dark slide indicator on the magazine shows white). Neither can you withdraw the magazine dark slide when the magazine is not attached to the camera. Both these restrictions therefore prevent accidental film loss caused by fogging.
USER GUIDE Accessories Film Speed Setting / Bar code The film speed (ISO / ASA) can be set automatically or manually. Automatic setting uses a Bar code (only some films have this feature, notably Fujifilm). This is the default setting. Film settings (ISO / film length) are automatic only if the magazine is set at Bar code automatic. That is, a bar coded film cannot override a manual film speed setting but a manual setting can override the film speed of a bar coded film.
USER GUIDE Accessories Data Imprint Setting Data imprinting can be activated or deactivated through the magazine menu. Access data setting: 1 Ensure the magazine settings lock is in the unlocked position. 2 Press the button until the Data symbol appears. 3 Press either the or the button to reach On or Off. 4 The new setting will be saved automatically after a time out of five seconds. 5 Return the magazine settings lock to the locked position.
Accessories Film Loading The film magazine can be loaded either on or off the camera. Regularly check the interior of the magazine and remove dust, particles or any scraps of paper from previous rolls of film. Load and unload film magazines away from direct light sources. 1) Fold out the film holder key and turn it counter-clockwise 90° A. Withdraw the film holder completely B.
7 TROUBLESHOOTING
USER GUIDE Troubleshooting Problem Possible cause Suggested correction Error massage - See chapter 7.1 Error Messages. Camera is deactivated The camera can be affected by a discharge of electricity. This can happen when the area around the control buttons on the grip accidentally touches a conductive cord or material connected to earth. Press the red ON - OFF button on the grip to activate the camera. This can deactivate the camera and does not cause any damage.
Troubleshooting 7.1 USER GUIDE ERROR MESSAGES If any error message is shown, do as follows: Caution! Be careful when you attach/detach the components to/from the camera. This will help prevent damage to the data bus connections. 1 Detach the components from the camera. 2 Attach the components to the camera again. If the error message still shows, do as follows: 3 Detach the battery grip. 4 Wait 10 seconds. 5 Attach the battery grip again. The camera’s processor have now been reset.
USER GUIDE Troubleshooting 7.2 CHANGE LANGUAGE ON SENSOR UNIT FROM UNKNOWN LANGUAGE General Settings Menu Language Menu MAIN MENU > GENERAL SETTINGS > LANGUAGE 1 Press the General Settings icon on the Sensor unit display. 2 The General Settings Menu will appear. 3 Navigate to the menu item with a Globe icon (number 6 on the list from the top, Language). 4 Scroll down to select your Language. Swipe right or press Menu / EXIT button to get back to Main Menu. H6D www.hasselblad.
Troubleshooting 7.3 USER GUIDE CLEAN THE LENS GLASS REMOVE DUST Caution! Do not touch the glass surface with your fingers. This can cause damage to the equipment. If there is dust on the lens glass, do as follows: 1 Remove the dust with a blower brush or very soft lens brush. REMOVE SMEAR Caution! Do not touch the glass surface with your fingers. This can cause damage to the equipment.
Troubleshooting 7.4 USER GUIDE CLEAN THE SENSOR UNIT FILTER Caution! Be careful when you attach/detach the components to/from the camera. This will help prevent damage to the data bus connections. Caution! When you remove the sensor unit, keep foreign objects away from the camera opening. The camera opening is very sensitive. This will help prevent damage to the equipment. 1 Remove USB 3 cable if connected. 2 Rotate the sensor unit release button to the right.
Troubleshooting USER GUIDE User Guide for Hasselblad H6D The information in this User Guide is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Victor Hasselblad AB. The H6D Product Images in this User Guide were not taken with a Hasselblad H6D. They are produced in 3D as visualization. They are used for illustrative purposes only and are not intended to represent the image quality produced by a Hasselblad H6D.
