H4X User Manual H4X
H4X C O N T E N T S Introduc tion 3 Dark slide indicator 21 Continuous 43 System requirements 4 Film tab holder 22 Multi exposure Warnings & restric tions 4 Film holder key 22 Magazine set tings lock 22 1 General over view – 7 Profiles 43 44 Making a prof ile 45 46 Operation 22 Using prof iles controls and displays 5 Bat ter y 22 But ton func tions 6 At taching and removing Grip display 7 Set tings 24 General over view of camera menu 48 View f inder
H4X Welcome to the Hasselblad H4X! The sensational Hasselblad H4 models are the result of unwavering and continuous refinements to the H line of cameras. Developments have raised the bar for medium format photography, retaining Hasselblad's position in first place around the world. The new H4X is designed to bring current H1 and H2 users up to a new level of functionality.
H4X H4 features in abundance Phocus The H4X is a marked step up for previous H1 and H2 owners. Many of the features from the H4 line are included, not least, True Focus. It is a very versatile model that allows the freedom of choice between using Hasselblad CF/CFH digital backs, third party digital backs as well as Hasselblad film magazines. The H4X is therefore a very serious contender in the medium format world that should appeal to a broad spectrum of photographers.
H4X 1 General overview – controls This section provides an introduction to the control buttons' functions as well as the information provided on the display screens.
H4X Button functions − overview Below is an overview of the primary functions of the control wheels and buttons. Some controls have dual or triple functions according to the state of the menu or setting. A full description can be found further on in this manual. Shutter release button MENU button Releases shutter. Also activates came ra from standby mode. Accesses menu. FLASH / (CONTROL LOCK) button Illuminates grip display. Accesses battery status and general informa tion screen.
H4X Grip display − overview Example of typical camera grip display Flash condition indication (No exposure compensation, normal flash synchronisation) Focus setting (Autofocus setting, single shot mode) Drive condition (Single setting) Aperture setting (f/5.6) Shutter speed setting (1/400s) Exposure Value display (EV 13.
H4X Viewfinder display − overview Typical viewfinder display. Note the LEDs will only be visible when activated (by the camera or a setting). Exposure method indication (‘aperture priority’ mode) Aperture setting (f/5.6) Exposure compensation setting reminder symbol Metering method setting (Centre weighted) Focus Assist LED Flash LED Warning triangle LED Exposure compensation setting (+0.
H4X Buttons and controls − details A Shutter release button A This button has half-press and full-press positions. By pressing half-way (or softly) the camera, auto focus function and exposure meter can be activated. By pressing all the way down (or more firmly) the shutter will be released (or the chosen exposure proce dure for example, the self timer is activated with this button). FLASH / (CONTROL LOCK) button / (EXIT) B This is a triple function button.
H4X Rear control wheel I The front and rear control wheels are used to make changes in exposure settings, access the various loop sections of the menu for settings as well as navigate the digital back’s menu. The effect of the wheels’ direction is customizable. J On the rear of the grip, as well as the rear control wheel, there are a further three control buttons: K True Focus J Activates the True Focus setting. See under Lenses / True Focus for explanation of this function.
H4X There are also two control buttons on the viewfinder, as well as the eyesight correction adjustment wheel: Eyesight correction adjustment wheel P The personal eyesight adjustment facility has a diopter range of -5 to +3.5, to suit most users. ON: EV correction adjustment button Q Press this button to access the EV compensation screen. Settings are made with either the front or rear control wheels. An EV correction symbol appearsOFF: on the grip and view finder display as confirmation.
H4X Saving settings changes on the grip The basic principle behind making changes is that the appropriate button is first pressed to access the menu and then settings altered by way of the control wheels. The appropriate control wheel is designated by arrowheads alongside the setting description. · Some buttons have a toggle function, the ON.
H4X 2 Camera Body Aluminium cast in one piece Stainless steel shell Integral quick-coupling plate Upgradeable firmware Modular design Integral ergonomic grip Pixel based user interface Photo: Bang Peng / Hasselblad Masters The H4X camera body is a robust construction of cast alu minium with a stainless steel shell for extreme durability. The integral ergonomic grip houses the main control interface and also contains the battery holder.
H4X 1 Carrying strap 2 1, 2 The carrying strap is attached by firstly withdrawing the safety collar. The hook is then freed and attached to the strap lug (fig. 1). Slide back the safety collar (fig. 2) to ensure the hook remains in the locked position between the small protruding lugs. The collar is purposely a tight fit and might need some effort to slide. Removing and attaching the battery holder 3 The H4X requires batteries for all actions.
H4X 9 Battery status (Battery grip rechargeable 7.2V Li-on only) 9 With a 'Battery grip rechargeable 7.2V Li-on' (optional accessory) fitted an immediate full-screen information and battery status check appears on the grip display by holding down the illumination button. This screen displays: • the firmware version • the number of captures taken since the last battery recharge / change.
H4X 16 OFF 17 From the active screen, press (not click !) the red ON.OFF button for a half second. All buttons (except the ON.OFF button) remain ineffective, producing virtually no demand on the battery. This is the normal mode when transporting or storing the camera or where there might be a risk of inadvertently activating the camera. (However, remove the batteries if you are going to store the camera for a period of more than a few weeks).
H4X 3 Viewfinder Multi-mode light metering Full exposure information 100% image 90° viewing angle for eye-line composition Full image for spectacle wearers Integral diopter adjustment Integral flash unit Photo: Joao Carlos / Hasselblad Masters The viewfinder provides a laterally corrected 100% image at eye-line level. It features a wide-range diopter adjustment to suit most users. The viewing distance is designed to provide full frame view even for eyeglass wearers.
H4X Parts and components – HVD 90x & HV 90 A B C D A. Rubber eye cup B. Hot shoe C. Eyesight adjustment wheel E F G D. Exposure compensation button E. Exposure method / mode button F. Integral flash unit H G. Flash unit release button H.
H4X 4 Film Magazine The 16-32 film magazines are sophisticated independent units within the H system. They allow the use of 120 or 220 film. Features include automatic film advance, wind on and wind off. A display provides information while some settings data can be printed on the edge of the film for archival pur poses. Film magazines not only provide for special requirements in technical applications but also allow a broader spectrum of expression for creative work.
H4X HM 16-32 Film Magazine The HM 16-32 film magazine is a sophisticated semi-independent unit within the modular H-system. It has its own power supply for individual information storage, LCD panel, illumination, etc. Much information is transmitted and received between the maga zine and the camera body, so ensure the databus connection is kept clean and not damaged in any way.
H4X LCD panel A B A The various functions are accessed by repeatedly pressing the function selector button (loop menu) and changes made by the ‘change-up’ and ‘change-down’ buttons. Any settings are auto matically saved. At very low temperatures the LCD will require a few seconds to display new settings. LCD illumination button C D B The LCD can be illuminated by pressing the display illumination button, which is accessible when the magazine is not attached to the camera.
H4X I J Film tab holder I Holds an ID tab from the film roll pack as a reminder of the type of film loaded. Don’t forget to change it if you change film type! Film holder key J Secures the film holder in the magazine. Fold out the key and turn counter-clockwise 90° to remove the film holder and turn clock wise 90˚ to lock the film holder in place. Magazine settings lock K L K All settings can be locked to avoid inadvertent changes.
H4X Attaching and removing the magazine 3 3, 4 You cannot remove a magazine from the camera body if the mag azine darkslide is not in place, (when the magazine darkslide in dicator on the magazine shows white). Neither can you withdraw the magazine darkslide when the magazine is not attached to the camera. Both these restrictions therefore prevent accidental film loss caused by fogging.
H4X Magazine settings Press the function selector ( access: button ) repeatedly to successively A. Film speed (ISO / Bar Code) C A B. Film length (120/220/ Number of frames) C. Data (on/off) B D E 1 3 E. Low-battery warning symbol Film speed setting / barcode The film speed (ISO / ASA) can be set automatically or manually. Automatic setting uses a barcode (only some films have this fea ture, notably Fujifilm). This is the default setting. 2 4 D.
H4X Frame counter setting The frame counter can be set to show either how many unex posed frames remain on a film or how many frames have already been exposed. The LCD shows your choice of setting by adding the word Remain as a reminder of the number of frames remaining or ‘countdown’. Absence of this word implies the opposite, namely, ‘count-up’, so it denotes the number of the next frame to be used (for example, the figure 4 means three frames have already been exposed).
H4X Film loading 1 2 1 2 3 4 5 1 The film magazine can be loaded either on or off the camera. Regu larly check the interior of the magazine and remove dust, particles or any scraps of paper from previous rolls of film. Load and unload film magazines away from direct light sources. 1) Fold out the film holder key and turn it counter-clockwise 90°. Withdraw the film holder completely.
H4X 5 Lenses Rapid and accurate automatic focusing capability Central electronic shutter Instant manual focus override with natural friction Instant automatic-focus access in manual mode Non-rotation of filter or accessory when focusing Non-rotation of focus ring in automatic focusing mode Flash sync at shutter speeds from 256s to 1/800s Automatic detection of extension rings and converters C type lenses from the V system can be used in combi nation with CF Adapter (optional acc
H4X Parts and components 1 A. B. C. D. E. A B C D E Lens shade index Manual focus ring Focusing distance scales Depth-of-field scales Lens index Attaching a lens 2 1 2 1 2, 3 Remove the front protective cover on the camera body by depressing the lens release button and keeping it depressed while turning the cover counter-clockwise. Remove the rear lens cap by unscrewing it in a counter-clockwise direction.
H4X Depth-of-field can be calculated as follows: 7 1. Focus the lens as required. 2. Make an exposure reading (auto or manual) and note the aperture setting. 3. Find the markings on either side of the central index that correspond to the chosen aperture. 4. From these two markings, read off on the required lens distance scale the two corresponding distances. 5. The depth-of-field (at that particular aperture and focus setting) will be the area included between these two distances.
H4X Manual focus 1 There is both a Manual focus mode setting and a manual override capability. Manual focus is a specific setting that you actively make, whereas manual override is always available as a temporary override of an autofocus setting. AF In Manual focus mode, focusing is carried out by rotating the focusing ring in the conventional manner. The focus setting remains until changed as with a conventional non-autofocus lens.
H4X Note though that in this mode the lens will focus at a distance and will remain focused at that distance while pressure remains on the shutter release button. In this way, you can focus on a nearby object for example, temporarily positioned within the focusing zone on the viewing screen and then without releasing pressure on the shutter release button, recompose knowing that the focus remains on the object chosen even though it is now outside the focusing zone.
H4X 1 AF True Focus can be used with longer lenses, smaller apertures etc but the further you come from situations similar to the 'ideal' as described above, the less the effect will be until it has no visible effect at all. Please remember that although True Focus can noticeably improve a demanding shoot it will only work effectively in the specific circumstances it was designed for. See an explanation of True Focus and further details about use towards the end of this chapter.
H4X True Focus and Absolute Position Lock The obvious situation that would most benefit from using True Focus would be a fashion shoot with a fairly wide angle lens at a large aperture setting and where the central area of the image is clothing while retaining focus on the model's face.
H4X True Focus True Focus can be used in combination with other autofocus settings to achieve various functions. Activated by shutter release button – True Focus retained 1 MENU 2 3 1/2 ! 4 In this mode the autofocus function is effectively converted into the True Focus function. That is, focus is set by half-pressing the shutter release button. Remember, though, that the True Focus function is retained until turned off in Custom Options. 1.
H4X Note Note Some lenses have extra characteristics that require further explanation. For example, the autofocus range on the HC 4/120 Macro lens can be limited by a specific setting on the camera allowing for near range, far range or full range. This only appears on the grip display together with that particular lens. The autofocus function is not possible with certain combinations of lenses and accessories. However, a warning is displayed which disappears after confirmation.
H4X 6 Light Metering & Exposure Control Three metering methods Five exposure methods Extremely accurate light metering The light metering system of the viewfinder is capable of selective sensitivity producing three reflective metering methods: Average, CentreSpot and Spot. All methods are measured in increments of 1/12 EV. Information transfer is rapid and automatic ensuring consistently correct exposure settings even in difficult and changeable lighting situations.
H4X Light metering and exposure control Two primary factors have to be considered when making exposure control choice, namely, metering method and exposure method: Metering method determines in which manner the light measurement is made and how much of the image is taken into account (Centre Weighted, CentreSpot and Spot). Exposure method involves the parameters and deciding factors about how the light measurement is translated into aperture and shutter speeds.
H4X Metering method 1 There are three metering modes available. All three are reflective methods (measuring the light reflected off various selected parts of the subject according to method) and are through the lens (TTL). These have the following designations (with their respective display symbols): EXP – Centre Weighted – CentreSpot – Spot See under 'Appendix' for details of sensitivity distribution.
H4X 1 Manual Exposure – M 2 Manual mode will provide total user control of the shutter and aperture settings. EXP To set the Manual mode, proceed as follows with the camera in active mode: R 1) Press the EXP button on the viewfinder. 2) Turn the front control wheel in either direction until you reach M (Manual). 3) Press Save (DRIVE button) to retain the setting. 3 In this mode the shutter speed and aperture settings are manually chosen by turning the front and rear control wheels.
H4X 1 Programmed variable: Pv - This mode is very similar to Pro grammed, except with the additional parameters of lens focal length being automatically taken into account. For example, long shutter speeds will automatically be avoided with a long fo cal length lens. 2 EXP F To set one of the modes, proceed as follows with the camera in active mode: 1) Press the EXP button on the viewfinder. 2) Turn the front control wheel (either direction) until you reach the required setting.
H4X b) The AE-L button also allows the spot metering function to make zone placements. When the AE-L button is pressed, the metered area is saved as a mid-grey (Zone 5). When the spot area is then placed over another part of the scene, the new area is then compared to the saved area and the difference can be read off the scale seen in the viewfinder.
H4X Exposure compensation/Quick Adjust The exposure compensation function, for both manual and automatic modes can be set from -5 to +5 EV, in 1/3, 1 or 1/2 EV increments (Custom Option #3) and is visible above the scale in the viewfinder and as a ± symbol on the grip display. Custom Options #3, #17 and #23 used to deactivate and alter the settings for the rear control wheel/Quick Adjust function. The quickest way to make an adjustment in auto-exposure mode is use the rear control wheel.
H4X Drive There are two drive modes, Single and Continuous, accessed by pressing the DRIVE button on the grip. Single 2 1 F DRIVE In Single mode, an exposure is made when the shutter release button is pressed and the camera is made ready for the next ex posure. To make the next exposure however, you must first re lease the shutter release button and then press again. In camera active mode: Save 1) Press the DRIVE button on the grip.
H4X 7 Profiles Profiles not only allow for rapid setup in changing working environments but also ensure an element of security.
H4X Profiles The profiles feature allows rapid access to pre-determined combinations of settings that increase the speed and security of workflow. One example might be in a social situa tion where there might be a need for formal outdoor portraiture followed by informal indoor handheld flash-assisted wide-angle shots, both situations requiring very different settings in a stressful environment.
H4X 1 3) Use the scroll bar to go through the list of profiles. Choose a Spare profile or a named profile (except Default). You can either save the new profile under the original name or you can change it 4) Press Save (DRIVE button). The Profile name screen is then displayed where you can rename the profile to what suits you (see under Image Info 4.2 for procedure details). To use a profile from the main screen, press the PROFILES button to reach the profiles screen again.
H4X 8 Custom settings – controls and displays This section describes the features that can be exploited to obtain the optimum in customized workflow. The custom options are designed to work for you in the back ground, ensuring security and also helping to bring down the barriers between you and capturing the image. Each one can be changed to suit your preferences so that the whole camera becomes a reflection of the way you like to work.
H4X General overview of camera menu MENU Text setting Self timer options Bracketing options Interval options Settings options System status Custom Options Digital This section is primarily only accessible with Hasselblad CF/ CFH use. 3rd party digital backs, may or may not initiate the Digital screen and its settings. Please refer to the appropriate user manuals for information.
H4X The H4X features the advantage of multiple customization of settings. This means that your personal choice of settings, and thereby appearance of various combinations of symbols on the display at any time, will not necessarily be the same as many of the screens illustrated in this manual. Menu charts – general Throughout this manual you will find charts to explain the steps and procedures required to alter the various settings.
H4X There are a number of more advanced features that while not necessarily used every day still remain immediately accessible through the menu system. They provide the integral finesses that make the H4X a powerful and sophisticated tool to satisfy a variety of professional demands. There are five main functions: Self timer, Bracketing, Interval timer, Settings and Drive. An important point to remember is that certain options are only available when the relevant screen has been accessed.
H4X 1 Self timer setting 2 The Self timer function is set in the following manner: F MENU 1) Press the Menu button on the grip. 2) Turn the front control wheel until Self Timer appears. 3) Press Enter (Drive button) on the grip.
H4X 2 Bracketing options available 2 frames or 3 frames or 5 frames options available options available 1/3 EV or 1/2 EV or 1 EV or 2 EV or 3 EV Tip A bracketing sequence can be stopped mid-sequence by pressing the ESC (ON.OFF) button. Tip Check the lower text-row on the screen for ON or OFF status.
H4X 1 Bracketing setting 2 The Bracketing function is set in the following manner: 1) Press the Menu button.
H4X 3 Interval options available 2 frames – 255 frames options available 1 second − 1 hour 1 3 Interval 2 F By using the interval setting, you can allow the camera to take a series of captures automatically over a set period. This is often required for time and motion studies, security surveillance, n ature study, etc. The exposure and focus settings (Manual or Auto) will be according to the camera settings at the time of capture.
H4X 4 Settings / 4.1 Custom Options options available CUSTOM OPTIONS 1 4 Settings 2 F From the Settings screen you can access four main sub-settings: Custom options, Image info, Date & Time and System status by turning the front control wheel. From each of these sub- settings you can access further items for setting changes. Look at the main menu chart to get an idea of where all the options are on the menu tree. MENU 4.1 Custom options 3 DRIVE 4 Press the Menu button on the grip.
H4X Stop down button function 4.1 Custom options • Stop Down The following is a description of all thirty four Custom Options. They are accessed by Menu > Settings > Custom Options. The words and figures in red signify the default setting for that option.
H4X Magazine exposure lock Spot mode 10 14 • Yes • No • Normal • Zone Allows you to release the lens and auxiliary shutter in camera body without a digital back attached. Determines how the camera behaves when set to Spot Mode. Normal makes the camera behave in the same fashion as when set to Average or Centre Weighted. Yes blocks the lens shutter and auxiliary shutter in camera body if the digital back is not attached. Generates message on grip display if attempted.
H4X Rear wheel quick adjust Interval & Self Timer 17 22 • Yes • No • Exit • Stay Allows rear control wheel to make a rapid EV adjustment (or EV compensation) in auto-exposure mode. Allows either the Interval or Self Timer mode to remain active after a capture or immediately return to standard setting. Yes turns the setting on. By turning the rear control wheel, the adjustment is made and appears on both displays as a ± symbol between the shutter speed and aperture values.
H4X Aperture control in Manual 27 True Focus in AF-S 32 • Front wheel • Rear wheel • Off • on Selects which control wheel changes the aperture setting when in Manual expo sure mode. Re-assigns half press of shutter release button to activate True Focus function in stead of standard automatic focus (single) Front wheel selects the front control wheel to change the aperture setting. Always return mirror Rear wheel selects the rear control wheel to change the aperture setting.
H4X Customizable button function list The TRUE FOCUS, AE-L, STOP DOWN and M.UP buttons can all be reassigned to different functions. Default settings are as ac cording to name. None Interval timer The button has no function. Initiates interval timer function. True Focus Cycle LM mode Activates True Focus function. Changes the light-metering method in a loop manner: Centre Weighted/ CentreSpot/Spot. AF Expose Activates the AF system in any focusing mode.
H4X 4.2 Image Info / 4.2.1 Imprint type Applicable only when film magazine attached. 1 4.2 Image Info 2 The Imprint type facility controls the text that will appear along the edge of each frame on a film. It is possible to imprint approximately 40 characters at one time. F MENU Imprint Type records technical information automatically created by the camera. 4.2.1 Imprint type The following can be chosen as an option: 4 3 DRIVE • Imp. Type 1 F Enter 5 • Imp.
H4X 4.2 Image Info / 4.2.2 Text 1 4.2.2 Text 2 MENU 3 In Text you can compose your own combination of letters, words, symbols, etc to be included in the metadata. The same procedure is also used to change a Profile name. F 1) 2) 3) 4) 5) 4 DRIVE 6) On the left side of the screen there is a small box frame containing an X symbol and two arrow symbols.
H4X 1 2 3 4 5 6 Changing text - an example Here is an example of how to change existing text (in this case the word ‘Text’ to a copyright symbol plus a photographer’s name -’Jens Karlsson’). See previous section 4.2 Image info for proce dure description. 1) Start by accessing the Image info screen. On the text row towards the bottom of the screen, the text line cursor is automatically placed to the right of the character that is to be changed.
H4X 4.3 Date & Time Alert message when a CF / CFH digital back is attached 1 4.3 Date & Time 2 Adjust date and time settings by the following procedure: F MENU 1) Press the Menu button on the grip. 2) Turn the front control wheel until Settings appears. 4 3 DRIVE 3) Press the Enter (Drive) button on the grip. F Enter 5 4) Turn the front control wheel to access Date & Time. 6 DRIVE 5) Press the Enter (Drive) button.
H4X 4.4 System status 1 4.4 System status 2 Check component usage and general servicing information as follows: F MENU 1) Press the MENU button on the grip. 2) Turn the front control wheel until Settings appears. 3) Press the Enter (DRIVE button) on the grip. 3 DRIVE 4 F 4) Turn the front control wheel to access System Status. Enter 5 DRIVE 5) Press the Enter (DRIVE button).
H4X Digital – primarily for CF/CFH use (3rd party digital backs may or may not initiate any of these screens) options available options available 1 ISO 50, 100, 200 or 400 Daylight, Cloudy, Shade, Flash, Fluorescent, Tungsten and Manual. 5 Digital (primarily for CF/CFH use) 2 From the Digital screen you can choose between various white balance and ISO settings.
H4X 9 Flash / Strobe – controls and displays Sync at all shutter speeds to 1/800s Integral fill-flash SCA 3002 compatible Flash measure capability Rear sync capability The H system meets professional demands for a variety of situations where flash is required. It includes an integral flash primarily intended for fill-flash use but strong enough for simple close work.
H4X The H4X can be used together with most flash units in manual mode. However, to make use of a TTL automatic function, you must ensure the flash unit is compatible with the SCA 3002 system. Connection is either by the PC socket or by the hot shoe (see warning note below). The viewfinder houses an integral fill-flash with a guide number of 12 and features OTF/ TTL flash control.
H4X To access the controls: 1 2 1) Activate the camera and press the FLASH button once. 2) Turn the front control wheel to set the amount of compensation required: • from +3EV through -3EV • press Clr (AF button) to clear the setting quickly if required.
H4X 5) If the settings were incorrect to match the output of the flash unit, the viewfinder display shows a red triangle alongside a flashing green ‘flash’ symbol plus a warning message - ‘Low flash’. The grip display will also show a warning message ‘Low flash’. Conventional measures should then be taken to correct the situation. (That is: move closer to the main subject, use a larger aperture setting or use a higher ISO setting).
H4X 10 Optional Accessories Optional accessories provide the opportunity to extend the capabilities of your system or just to add extra convenience to suit your way of working.
H4X HVM waist level viewfinder UV-sky filters (3053328) (3053470, 3053474 and 3053478) The HVM waist level viewfinder allows a comfortable lower viewing angle either for effect or where eye contact with the subject is desirable in portrait photo graphy, for example. Autofocus function of all lenses fully retained. Optimized for horizontal format shooting and not suit able for vertical format use. Absorbs UV radiation and reduces blue haze without affecting colors.
H4X DC power grip Release cord H (3043350) (3043370) Removable H-camera grip with AC p ower adapter for supplying camera power from domestic mains supplies. Remote release cord with a cable length of 0.5 m. Focusing screens Battery grip rechargeable 7.2V Li-on All focusing screens are of the Spheri cal Acute-Matte D type with or with out grid and central markings for spot (ø 7.5) and AF metering area.
H4X HC lens range HCD 4/28mm HC 3.5/35mm HC 3.5/50-IImm HC 2.8/80mm HC 2.2/100mm HC Macro 4/120-IImm HC 3.2/150mm HC 4/210mm HC 4.5/300mm HC 3.5–4.5/50–110mm HCD 4.0–5.
H4X Connectivity diagram Optional viewfinders Tilt/Shift HV 90x / HVD 90x viewfinders Accessories HTS 1.5.
H4X 11 Appendix P and Pv explanatory charts Technical specifications Problems, Equipment Care & Service This section provides an insight into the more technical aspects as well as some important reference information.
H4X True exposure Light level at image plane T fully open Maximum aperture Stopped down one stop with True Exposure mode ON Stopped down one stop with True Exposure mode OFF Time T stopped down = T fully open (using True Exposure) T stopped down > T fully open (without True Exposure) Note You can download a fuller explanation of this situation from www.hasselblad.com. True exposure True Exposure is an HC/HCD lens function that allows the shutter speed to remain unaffected when stopping down.
H4X Automatic exposure – P & Pv Mode P Mode -5 -4 35 50 50-110 @ 50 35 50 50-110 @ 50 80 120 50-110 @ 110 80 120 50-110 @ 110 210 150 210 150 -3 -2 -1 1 0 2 3 4 5 6 7 8 9 10 1.
H4X Technical specifications Camera Type Auto-focus, auto-exposure digital SLR camera with interchangeable viewfinders and lenses. Construction One piece stainless steel shell. Die-cast aluminium internal structure. Tripod sockets (1/4 and 3/8”) and quick coupling tripod plate for rapid mounting. Lenses Hasselblad HC/HCD lenses with built-in electronically controlled shutter and aperture. Automatic or manual focusing with instant manual focus override.
H4X Default Settings ('Default' profile) Exp.mode LM mode Exp. adjust Focus mode Drive mode Flash sync Flash adjust Self timer Bracketing Interval timer Custom options A (Aperture priority) Centre weighted 0 AF-S S Normal (beginning of exp.
H4X SERVICE Problems, Equipment Care & Service Return your equipment to a service centre for occasional checking and preventive maintenance to ensure optimal reliability. You can easily keep a check on service intervals by looking under ‘Info’ in the menu. If your camera is used constantly and intensively, regular periodic check-ups are recom mended at one of the Hasselblad Authorized Service Centers.
H4X Q U I C K I N D E X A E P Accessories 71 Eyepiece adjustment Accessor y connec tion 16 Exposure compensation/Quick Adjust 42 P & P v modes AE-L but ton 40 Exposure method Prof iles 4 4 Appendix 76 Automatic exposure mode 39 PC-connec tor 16 38 F Autofocus 30 B 18 S Flash 67 Saving set tings 12 Focus assist Self timer 50 Shut ter and aper ture control 28 29 G Base plate 16 Bat ter y 14 Grip display 7 Standby 15 I Strobe 67 T Bracketing 53 Image inf
H4X The information in this manual is furnished for informational use only, is subject to change without notice, and should not be con strued as a commitment by Victor Hasselblad AB & Hasselblad A/S. The images in this manual were not taken with a Hasselblad H4X. They are used for illustrative purposes only and are not intended to represent the image quality produced by a Hasselblad H4X.
H4X Hasselblad A/S Hejrevej 30, DK - 2400 Copenhagen, Denmark Victor Hasselblad AB Box 220, SE - 401 23 Göteborg, Sweden 10.
