User Guide

This manual is a provisional version only.

MAIN MENU > Storage

e Storage menu provides entries for working with storage media.

Here, you can format media, copy images from the camera to a

hard disk or computer and create new batches on available media.

You can also set the initial approval status (green or yellow) as-

signed to new pictures.

The Delete command

e sensor unit is only able to read and write to media that have

been initialized to use the FAT32 format, which is also readable

by both Windows and Macintosh operating systems. However,

new cards or disks sometimes arrive without any formatting, or

you might want to convert media that are currently using a format

that the camera cannot read.

To delete images:

1. When the image you want to delete is viewed on screen, press

the MENU button.

2. Select MAIN MENU > STORAGE > Delete. (See also

Navigating the Menu System for details about how to ﬁnd

this setting.)

3. Press the  to open the Delete dialog.

4. You now have the option to select what to delete. Use the (+)

or (-) button to select between the following:

• This image: Deletes the selected image

• All red in batch: Deletes all red images in the current batch.

• All yellow/red in batch: Deletes all yellow and red images in

the current batch.

• All in batch: Deletes all images in the current batch

5. Press OK.

6. You now return to the STORAGE menu. Either move on to

another setting by using the navigator button or press the

menu (EXIT) button to exit the menu system.

Navigating the storage settings

