User Guide

66
This manual is a provisional version only.
Setting the Date & Time
e sensor unit has an internal clock that keeps track of the date
and time. ese are used to mark each shot with the date and time
at which it was taken. ey are also used to label batches with the
date on which each batch was created.
 Note that the date and time are synchronized to your computer
whenever you connect it to your sensor unit. You may therefore
never need to set the date and time manually as described in this
section.
To set the date and time:
1. Select MAIN MENU > SETTINGS > USER INTERFACE >
Date & Time. (See also Navigating the Menu System for
details about how to find this setting.)
2. Press  to open the DATE & TIME menu.
3. The date & time menu includes entries for Year, Month, Day,
Hour and Minute. Use  and  to select one of these, then
use the (+) and (-) buttons to set the value of each entry.
4. When you are done setting the date and time, press the menu
(EXIT) button to exit.
Navigating the date and time settings
1

2

2005 - 2100
1 - 12
1 - 31
0 - 23
0 - 59


3