User Guide

This manual is a provisional version only.

Deleting images

e sensor unit enables you to delete images using any of the following techniques:

• Delete the currently selected image only.

• Delete all images from the current batch

• Delete all images from the current medium

• Delete all red-status images from the current batch

• Delete all red-status images from the current medium

• Delete all red- or yellow-status images from the current batch

• Delete all red- or yellow-status images from the current medium

To delete a single image, navigate to and select the target image in the browse window,

open the menu and select MAIN MENU > Delete.

 There is also a one-button shortcut for deleting single images. To use it, select a target image

and then press and hold the  until the conﬁrm-delete dialog opens.

 Another way of working is to simply assign unwanted images as Red. In this way, you retain

the option (for a while) of changing your mind later while allowing the system to automati-

cally delete the unwanted images as the storage medium ﬁlls up.

To delete several images from a given batch or medium, ﬁrst navigate to and select the

batch or medium and then open the menu and select one of the following:

• MAIN MENU > STORAGE > DELETE > All Red

• MAIN MENU > STORAGE > DELETE > All Red & Yellow

• MAIN MENU > STORAGE > DELETE > All

You will always be asked to conﬁrm each delete operation.

For complete details about how to use the menu system to delete single or multiple im-

ages, please see MAIN MENU > STORAGE > Delete .