User Guide
43
This manual is a provisional version only.
Using Instant Approval Architecture
e Instant Approval Architecture system helps you to evaluate your images as quickly
as you take them. It works by supplying immediate audio feedback, which tells you
instantly whether each new picture is exposed correctly or likely to be over- or underex-
posed. ereaer, the system enables you to assign each image one of three status levels.
ough you can use the system any way you like, the intention (based on the ‘traffic light’
principle) is that you should assign the levels as follows:
• Green for your best shots
• Yellow for images that need closer inspection
• Red for images that should probably not be used.
Please note, when the current storage medium is full, red-status images will be deleted (one
at a time) to make room for new shots. You can continue shooting until no red-status images
remain; if you then try to take additional new shots you will get a medium-full message.
One of the greatest advantages of digital photography compared to film is that it costs
no more to shoot 100 images that it does to shoot one. Photographers therefore tend to
take many more pictures when shooting digitally. By assigning approval levels as you
work, it can be much easier to sort through and select images when you get back to your
computer.
Standard Instant Approval workflow
e standard method of working with the Instant Approval Architecture is as follows:
1. Take a shot.
2. The camera analyzes the shot to find out if it seems to be over- or underexposed. If it
suspects a problem, it does the following:
• Provides audio feedback by making a warning sound, which immediately
alerts you to a possible problem even if you are not looking at the screen.
• Downgrades the approval status to yellow.
Note that some shots may trigger the warning even though they are exposed according to
your intentions. You should consider these warnings only as a guideline. This feature can
be turned off.