User Guide

41
This manual is a provisional version only.
2. The screen now shows a list of media devices currently con-
nected to the sensor unit. Often, there is only one.
Each medium shows a name, total size and an estimate for
how many images will fit on it. To the right of the medium
name is a set of three coloured numbers in parentheses.
These indicate the total number of images of each approval
status (green, yellow and red) that currently exist on that
medium. For example, if you see a card that shows (18 / 5
/ 3), then that card contains a total of 26 images: 18 green
(approved), 5 yellow (waiting) and 3 red (delete).
3. If more than one medium is listed, then use  and  to
highlight the medium you wish to use.
4. The currently selected medium shows a blue border.
5. Press the zoom-in button to zoom-in on the currently high-
lighted medium.
6. A list of batches on this medium now appears. Each batch
shows a folder icon, a name and the date on which it was cre-
ated. As with the media list, you can read the number of shots
of each approval status that are stored in each batch.
7. As with media, use  and  to highlight the batch you wish
to use.
8. The currently selected batch shows a blue border.
9. Press the zoom-in button to zoom in on the currently high-
lighted batch.
10. The nine-thumbnail view of your selected batch now
appears.
The current medium and batch are now set. Your next new
shot will be stored here and the browse buttons will show
only the images from this batch.
Creating new batches
You can create any number of batches on each medium. To create
a new batch, first make sure you have selected the correct current
medium (see Navigating Media and Batches ) and then use the
MAIN MENU > STORAGE > BATCH entry of the menu system
to create the new batch. See Creating Batches for a detailed
procedure.
1
2
4
5
6
8
3
7
109