- HASSELBLAD User's Manual CF22 CF39

49
Capture sequence
is feature functions in the same manner as an interval timer
and only works in conjunction with a motor or winder driven
camera model except in the case of the Pinhole setting where it is
the only way of controlling such exposures (see later section for
full details).
Initial delay: Controls the amount of time required to elapse before
the rst exposure.
Delay: Controls the amount of time required between each ex-
posure.
Count: Controls the total number of exposures required.
Setting CAMERA model and options
Proceed as follows:
1. Press the menu (
MENU) button to open the menu.
2. Use
 and  to select the SETTINGS sub-menu.
3. Press
 to open the SETTINGS menu.
4. Use
 and  to select CAMERA.
5. Press
 to open the CAMERA menu.
6. Press either the
or button to select camera model.
7. Use
 and  to select SHUTTER DELAY or EXPOSURE
TIME if required.
8. Press either the
or button to make new settings if
required.
9. Press the menu (
EXIT) button to exit the menu system and
keep your settings.
1 2
3 4
5 6
7 8
9