User manual
Table Of Contents
- Introduction
- Firmware Updates
- Disposal
- Restrictions and Recommendations
- GENERAL OVERVIEW
- Parts and Components – overview
- A6D Lens Range
- GETTING STARTED
- Mounting the lens
- Attaching the lens shield
- Attaching the adapter plate
- Power Connection
- Synchronous connections
- USB & link to Phocus or SDK based application
- Saving images to a memory card
- Attaching the USB cable Lock
- Settings
- Navigating the Menus
- Overview of Menus and Settings on Sensor Unit
- Touch Screen Navigation
- Button Navigation
- The Main Menu
- Add Favourite Functions to Main Menu Screen
- Remove Favourites from the Main Menu Screen
- Display Control Screen
- Settings on the Control Screen
- Camera Settings Menu
- Image Menu
- Quality Menu
- Video Settings Menu
- Quality Menu
- Live View Menu
- General Settings Menu
- Display Menu
- Storage Menu
- Date & Time Menu
- Power & Timeouts Menu
- Language Menu
- Service Menu
- About Menu
- Browsing images
- Preview Modes
- Standard Preview
- Browsing
- Zoom in and out
- 9 View Mode
- Folder View
- Card View
- Create New Folder
- CAMERA MAINTENANCE
- Cleaning Sensor Unit & IR Glass
- TECHNICAL APPENDIX
- A6D-100c Technical Specifications
- Lemo connector Signal Information
- Electrical Timings
- Coverage
- Coverage vs altitude
- GSD vs altitude
- Physical Dimensions
- Accessories
- FCC Class A Notice for A6D-100c
- FCC Caution
- Disclaimer
- Index
5
A6D User Manual
RESTRICTIONS AND RECOMMENDATIONS
Caution!
Be careful when you use the camera. The camera is a precision instrument.
This will help prevent damage to the camera.
Caution!
Use protective covers as much as possible. The protective covers will help
prevent damage to the equipment.
Caution!
Use a protective case or camera bag when you transport the equipment. This
will help prevent damage to the equipment.
Caution!
Protect the equipment from oil fumes, steam, humid conditions and dust.
This will help prevent damage to the equipment.
Caution!
Seal all equipment in a plastic bag or similar if you enter damp and humid
condition from dry and cold condition. Wait until the equipment has
acclimatized to the new temperature before you remove the equipment from
bag. This will help prevent damage to the equipment.
Caution!
Avoid frequent and high temperature changes. This can cause damage to the
equipment.
Caution!
Keep camera and equipment away from moisture. If your camera becomes
wet, disconnect from electric power and let camera dry before further use.
This will help prevent damage to the equipment.
Caution!
Store the equipment in a dry environment. This will help prevent damage to
the equipment.
Caution!
Be careful when you attach/detach the components to/from the camera. This
will help prevent damage to the data bus connections.
Caution!
Do not insert ngers into the camera body. This can cause damage to the
equipment
Caution!
Do not touch the CMOS Sensor with your ngers. The protective lter is very
sensitive. This can cause damage to the equipment.
Caution!
Keep all equipment out of reach of small children. This will prevent damage
to the equipment.
Caution!
Do not open the sensor unit. This can cause damage to the sensor unit.
Caution!
Do not try to remove the glass IR lter from the front of the CMOS (due to
dust or similar). This can cause damage to the equipment. Always contact
your local Hasselblad Authorized Service Centre.
Caution!
If you use canned compressed air to clean the glass of IR lter, be very
carefully before use. This will help prevent damage to the lter.










