User manual

42
A6D User Manual
Characteristics Symbol Value Unit (DC)
H level output voltage (min) VOH 4.0 V
L level output voltage (max @ IOL) VOL 0.4 V
L level output current IOL 4.0 mA
H level input voltage (min) VIH 3.5 V
L level input voltage (max) VIH 1.5 V
Characteristics Symbol Value Unit (DC)
H level output voltage (max) VOH VSYS + V
Pull-up impedance R 10 Kohm
L level output voltage (max @ IOL) VOL 0.4 V
L level output current IOL 20.0 mA
Characteristics Symbol Value Unit (AC)
Rise time (max) tR 1.0 µs
Fall time (max) tF 1.0 µs
TRIG pulse width (min) tTRIG 10 ms
Expose start (min) tSTART 100 µs
Expose start (max) tSTART 1 ms
BUSY start (min) tBUSY 0 ms
BUSY start (max) tBUSY 200 ms
ACTIVE time (min) tACT 1000 ms
ACTIVE time (max) tACT ∞ s
Mid expose pulse width (typ) tMID 5 ms
VOLTAGE LIMIT
The electrical denition of signal type “CMOS” will be according to the limits
specied below:
The electrical denition of signal type “OC” will be according to the limits
specied below:
TRIG, -EXP and -BUSY timing relationship
Characteristics Symbol Value Unit (AC)
Maximum output voltage VSOH 5.25 V
Minimum output voltage VSOL 4.75 V
Characteristics Symbol Value Unit (AC)
Peak current consumption for VSYS+ ICC 40 mA
VOLTAGE LIMIT
The VSYS+ signal will conform to the following voltage requirements:
CURRENT LIMIT
The VSYS+ signal will conform to the following current requirements: