User manual

11
A6D User Manual
GETTING STARTED
MOUNTING THE LENS
The A6D lens mount contains a locking mechanism that securely holds
the lens in place with an even pressure all around the barrel.
Locate the lens mount locking bolt.
Before mounting a lens
ensure the plastic collar
supplied with the lens
is in position and the
joint is aligned with the
location lug.
To mount a lens, locate the red dot on the rear lens mount and ensure it is
facing upwards. Insert the lens into the camera body and rotate clockwise
until a click is heard.
1
3
2
To detach the lens,
press the lens release
button on the side of
the camera and turn the
lens anti-clockwise.
Insert the supplied 2.5mm Allen key into the bolt and rotate
clockwise half a turn to engage the lens mount lock.
4
ATTACHING THE LENS SHIELD
There are six lens shields available
depending on the lens in use.
To mount the shield for the lens,
simply offer up the shield to the
outer lens mount and rotate the
shield clockwise until the shield
locks.
NB: Do not overtighten as damage
to the lens mount may occur
To mount the shield for the 35mm
lens it is rst necessary to mount
the adaptor ring to the existing outer
lens mount. This adaptor ring is held
in place with 4 screws.
Once this has been mounted, you
can attach the lens and then mount
the shield and secure it with a turn
in the clockwise direction.