User manual

USING THE 907X
www.hasselblad.comCONTENTS
56
907X 50C USER GUIDE
Self Timer
Exposure Bracketing
Interval
● Self Timer (A)
The camera will wait a pre-set time to make the exposure
after the Shutter release button is pressed.
Time: Delay between shutter release and exposure.
When Finished: Determines if the function shall be
active after a completed cycle or not. If set to Exit , the
Self Timer is disabled after the exposure.
● Interval (B)
The camera will make a pre-determined number of
exposures with a pre-set interval time.
Time: The time between exposures.
Frames: How many exposures will be made.
Initial Delay: Delay between shutter release and rst
exposure.
Metering: Exposure metering for all frames or rst frame
only.
When Finished: Determines if the function shall be
active after a completed cycle or not.
● Exposure bracketing (C)
The camera will automatically make a pre-determined
number of exposures with a pre-set exposure adjustment
difference between each frame.
Amount: How much exposure difference between each
exposure.
Frames: The number of exposures in the sequence.
Initial Delay: A delay between shutter release and the rst
exposure.
Initial Delay: Delay between shutter release and rst
exposure.
Param in M: Which of aperture or shutter speed to
change if exposure bracketing is used in manual mode.
Sequence: Determines which order exposure adjustment
is added.
When Finished: Determines if the function shall be
active after a completed cycle or not.
● Focus Bracketing
The camera will automatically take a pre-set number of
images and calculate a focus shift between each capture.
Step Size: Amount of focus position change between
each capture.
Frames: The number of exposures in the sequence.
Initial Delay: A Delay between Shutter Release and rst
exposure.
Exposure Delay: A delay between exposures.
Sequence: The order in which captures are made.
When Finished: Determines if the function shall be active
after a completed cycle or not.
For
Self Timer , Interval , Exposure bracketing and Exposure
Bracketing,
the left part of the panel displays the current
setting. If no changes are required, tap the function icon again
to make it active.
To change any of the parameters, tap the right part of the screen
(E) . This will bring up the dedicated settings for the function. See
details on the following pages.
Focus Bracketing
A
B
C
D
E