User manual
Table Of Contents
- 1 INTRODUCTION
- 2 Lenses
- 3 Quick Start
- 4 Safety
- 5 Parts & Controls
- 6 Using the 907X
- 6.1 Touch display
- 6.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed exposure compensation setting
- Light meter mode
- 6.3 Memory cards
- 6.4 Live view indications
- 6.5 Focusing
- 6.6 Move autofocus point
- 6.7 Resize autofocus point
- 6.8 Browsing, preview and histogram
- 6.9 Image Rating
- 6.10 Video Recording
- 7 907X Control Grip
- 8 907X Optical Viewfinder
- 9 Phocus
- 10 Settings
- 11 Accessories
- 12 Appendix
907X 50C USER GUIDE
PARTS & CONTROLS
www.hasselblad.comCONTENTS
42
1
Left strap lug
Left strap lug for shoulder straps.
2
USB Port
USB-3 type C for connection to a host computer or iPad
Pro.
3
Microphone
3.5mm stereo input for an external microphone.
This port is also used to connect the Release Cord X for
vibration free remote release of the camera. See page
150.
4
Headphone
3.5mm stereo output for connection of headphones.
5
Flash sync input
For synchronization with mechanical shutters. Use dedi-
cated ash sync input cable. This input is not used with the
907X.
6
Flash sync output
For connection of external ashes. Use the supplied ash
sync output cable for cable connected ashes. Wireless
ash triggers with a 2.5 mm plug can be connected using
the Exposure Cable CW. See illustration to the right.
Maximum allowed voltage: 100 VDC.
7
ELX output
Connection to an EL-type camera or the Winder
CW. Enables exposure remote control from Phocus.
This output is not used with the 907X.
5.2 PORTS AND CONNECTIONS
To Flash sync
output
(6)
.
From ash
Wireless
trigger
Flash Sync output Cable
Exposure Cable CW
FLASH CONNECTION
1
2 3 4 5 6
7