User manual
Table Of Contents
- 1 INTRODUCTION
- 2 Lenses
- 3 Quick Start
- 4 Safety
- 5 Parts & Controls
- 6 Using the 907X
- 6.1 Touch display
- 6.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed exposure compensation setting
- Light meter mode
- 6.3 Memory cards
- 6.4 Live view indications
- 6.5 Focusing
- 6.6 Move autofocus point
- 6.7 Resize autofocus point
- 6.8 Browsing, preview and histogram
- 6.9 Image Rating
- 6.10 Video Recording
- 7 907X Control Grip
- 8 907X Optical Viewfinder
- 9 Phocus
- 10 Settings
- 11 Accessories
- 12 Appendix
www.hasselblad.com
27
QUICK START
CONTENTS907X 50C USER GUIDE
USING THE PROTECTIVE COVERS
Whenever the lens is removed from the camera or the 907X
camera body is separated from the CFV II, protective covers
should be used. The front protective cover is explained on
page 25.
Camera rear protective cover
To remove:
Press the top part (A) down and tilt the cover backwards to
release it.
To attach:
Place the cover on the lower supports (B) and press the top
part (A) while tilting forward. Release pressure on the top
part.
CFV protective cover
To remove:
Slide the locking button (C) in the direction of the arrow (E)
and tilt the cover forwards to release.
To attach:
Place the CFV on the lower supports (D) and slide the
locking button in the direction of the arrow (E)
. Tilt the
cover inwards until it locks.
E
A
A
B
C
C
E
D