User manual
Table Of Contents
- 1 INTRODUCTION
- 2 Lenses
- 3 Quick Start
- 4 Safety
- 5 Parts & Controls
- 6 Using the 907X
- 6.1 Touch display
- 6.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed exposure compensation setting
- Light meter mode
- 6.3 Memory cards
- 6.4 Live view indications
- 6.5 Focusing
- 6.6 Move autofocus point
- 6.7 Resize autofocus point
- 6.8 Browsing, preview and histogram
- 6.9 Image Rating
- 6.10 Video Recording
- 7 907X Control Grip
- 8 907X Optical Viewfinder
- 9 Phocus
- 10 Settings
- 11 Accessories
- 12 Appendix
www.hasselblad.com
26
QUICK START
CONTENTS907X 50C USER GUIDE
ATTACH THE SHOULDER STRAP
Attach the included shoulder strap to the camera by following
these instructions:
A
Hold or place the camera with the lens pointing down
and one of the strap lugs facing you. Attach the leather
end (1) of the strap to the metal strap lug (2).
B
Open the metal ring (3) with a sharp tool. E.g. a
screwdriver or a small knife. Be careful not to scratch the
camera.
C
Insert the open end of the metal ring into the hole of
the strap lug. Rotate the ring one full turn and make
sure it is fully attached to the strap lug.
D
Finally, slide the plastic fastener (4) down.
Repeat the process for the other side of the camera.
Note!
If the strap is exposed to strong pulling force there is a risk that
the metal rings or the strap itself can be damaged. Regularly
check the condition and replace the rings or the entire strap if
necessary.
D
C
B
A
1
3
2
4