User manual
Table Of Contents
- 1 INTRODUCTION
- 2 Lenses
- 3 Quick Start
- 4 Safety
- 5 Parts & Controls
- 6 Using the 907X
- 6.1 Touch display
- 6.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed exposure compensation setting
- Light meter mode
- 6.3 Memory cards
- 6.4 Live view indications
- 6.5 Focusing
- 6.6 Move autofocus point
- 6.7 Resize autofocus point
- 6.8 Browsing, preview and histogram
- 6.9 Image Rating
- 6.10 Video Recording
- 7 907X Control Grip
- 8 907X Optical Viewfinder
- 9 Phocus
- 10 Settings
- 11 Accessories
- 12 Appendix
www.hasselblad.com
25
QUICK START
CONTENTS907X 50C USER GUIDE
ATTACH THE LENS
● First remove the lens rear protective cap by rotating
counter clock-wise (A)
. Then remove the front protec-
tive cover (B) of the camera by pressing the lens release
button (C) and rotating the cover counter-clockwise.
● Align the red index on the lens (D) with the index on the
camera (E) and insert the lens. Rotate the lens clock-
wise until it clicks into place (F).
● Remove the front protective cap by pinching the two
buttons together (G).
Note!
In order to collect as little dust as possible on the sensor, we
recommend that you perform lens change in an as dust-free
environment as possible. Try to make the lens change with the
sensor facing down.
You can use a soft dust brush or compressed air to remove
dust. Also see page 153.
A
B
C
D E
G
G
F