User manual
Table Of Contents
- 1 INTRODUCTION
- 2 Lenses
- 3 Quick Start
- 4 Safety
- 5 Parts & Controls
- 6 Using the 907X
- 6.1 Touch display
- 6.2 Touch display main menu
- Main Menu
- Add shortcuts to main menu favourites
- How to add shortcuts to main menu
- How to remove shortcuts on the main menu
- How to move shortcuts on the main menu
- Control screen
- Locked exposure parameters on the control screen
- Settings on the control screen
- Self Timer settings
- Interval settings
- Interval operation
- Exposure bracketing settings
- Exposure bracketing operation
- Long exposure screen
- Focus Bracketing
- Focus Bracketing settings
- Focus Bracketing Operation
- Step Size
- DoF and Step size visualized
- Examples
- Fixed exposure compensation setting
- Light meter mode
- 6.3 Memory cards
- 6.4 Live view indications
- 6.5 Focusing
- 6.6 Move autofocus point
- 6.7 Resize autofocus point
- 6.8 Browsing, preview and histogram
- 6.9 Image Rating
- 6.10 Video Recording
- 7 907X Control Grip
- 8 907X Optical Viewfinder
- 9 Phocus
- 10 Settings
- 11 Accessories
- 12 Appendix
www.hasselblad.com
22
QUICK START
CONTENTS907X 50C USER GUIDE
3.1 QUICK START
This chapter explains how to make the rst capture using the
default settings.
FIRMWARE
Make sure the camera has the latest rmware by checking
the latest version that you can download at www.hasselblad.
com. You can see the currently installed rmware by following
the procedure on page 147. Instructions on how to update
rmware can be found on page 142.
Note!
Make sure the CFV II is powered off before attaching the 907X
camera body.
ASSEMBLING THE CAMERA
1 Remove the rear protective cover of the 907X camera body
by pressing on the top part (A) and then swinging the cover
backwards (B).
2 Remove the front protective cover of the CFV II 50C by
sliding the lock button (C) in the direction of the arrow and
then swinging the cover outwards (D).
3 Attach the CFV II 50C to the 907X by placing the CFV II
onto the lower supports on the 907X (E).
4 Swing the CFV II towards the camera while holding the lock
button on the open position (F).
5 When the CFV II is attached to the camera, release the lock
6 button (G) and make sure the CFV II is securely attached to
the 907X by pushing it in the direction of the arrow.
Note!
The 907X camera body can only be used with the CFV II 50C.
Older versions of the CFV cannot be used.
A
C
D
B
E
F
G