User manual

149
www.hasselblad.com
149
ACCESSORIES
CONTENTS907X 50C USER GUIDE
XH LENS ADAPTER
CP.QT.00000290.01
The XH Lens Adapter can be used to mount an HC or HCD
Lens onto the 907X Camera.
The XH Lens Adapter widens your lens choices to include all
12 H-system HC/HCD lenses, and accessories including a
macro converter and 3 extension tubes.
The HC/HCD lens range includes a 24 mm wide-angle lens,
a 300 mm telephoto lens and a 100 mm f 2.2 lens, delivering
small depth-of-eld range and a beautiful, smooth Bokeh.
Note!
Currently the 907X Camera supports the XH Lens Adapter
with Auto Focus for all HC/HCD Lenses, except the HC 120
Macro. Converters and extension tubes can also be used with
AF.
Note!
Only HC/HCD lenses with rmware 18.0.0 or later can be
updated for AF functionality. Lenses with older rmware have
older hardware and cannot be updated with this rmware.
They can only be used in Manual Focus Mode.
For a complete list of accessories, see
https://www.hasselblad.com/x-system-accessories/
XH CONVERTER 0,8
CP.HB.00000627.01
The XH Converter 0,8 is an accessory for using HC/HCD
lenses on X System cameras. It reduces the focal length of
the attached lens by a factor of 0,8x as well as increases the
maximum and minimum aperture with 2/3 stops.
• Hasselblad X System cameras, X1D with rmware 1.25.0 or
later, or X1D II 50C/907X/CFV II with rmware 1.4.0 or later.
• All Hasselblad HC and HCD lenses, except HC120 and
HC120-II with rmware older than 18.0.0.
• Lenses with rmware 18.0.0 to 19.0.3 must be upgraded to
19.1.0 or later. Lenses with rmware older than 18.0.0 will
have manual focus only.
• HCD lenses were originally designed for a smaller format
than HC lenses. Therefore some reduction of performance
in extreme corners can occur.
Note!
Only HC/HCD lenses with rmware 18.0.0 or later can be
updated for AF functionality. Lenses with older rmware have
older hardware and cannot be updated with this rmware.
They can only be used in Manual Focus Mode.