User manual

SETTINGS
www.hasselblad.comCONTENTS
129129
907X 50C USER GUIDE
Note!
When you use the camera with a ash,
the Exposure Simulation will not display
a correct result. For example, if you
have set the Aperture and Shutter to be
adapted to ashlight indoors, normally
the Exposure Simulation displays an
image that is too dark in the Live View
mode. It is advised to turn off Exposure
Simulation before you start to take
photos with a ash.
Note!
When Autofocus is active and analysing
the subject, the Exposure Simulation is
deactivated to let the Autofocus system
operate in optimal conditions. When the
Autofocus process is ready, the Exposure
Simulation is automatically activated
again.
LIVE VIEW
MAIN MENU > GENERAL SETTINGS >
LIVE VIEW
1 Press the General Settings icon on
the touch display.
2 The General Settings menu appears.
3 Press the Live View menu.
Swipe right or press the menu button to
get back to the main menu.
1
1
1
Exposure Simulation
A/S/P/Full Auto
If this box is checked, the display
will simulate what the nal image
will look like. When unchecked, the
brightness will not be affected by
exposure adjustments.
M
Check this box to use exposure
simulation in Manual Mode. The
brightness of the screen will reect
the aperture, shutter speed and ISO
settings.
Live View settings menu
General settings menu
Note!
If Exposure Simulation is active and the
exposure settings are set to very high
overexposure or very low underexposure
for the actual light conditions, the Live
View displays a very light or very dark
image. In extreme cases, it results in a
completely overexposed white image
or a completely underexposed black
image. In these cases you can use the
balance scale, down to the left in Live
View mode, while adjusting the exposure
settings, to maintain desired exposure.