Service Manual, Diagrams and Assembling Charts

January 2001
903SWC
4:2
Revision 0
90310.EPS
001023
90307.EPS
001026
90306.EPS
001211
Reassembly
Fig. 11
Fitting the mechanism plate into the shell
Place the signal (20737) according to fig. 11.
Fit the mechanism plate (30367-1) into the
shell. Fit the washer (810928) and the
spacer (810721) and secure them into
position using screw (820047).
Fig. 12
Crank
Lubricate according to fig. 13.
20737
30367-1
810928
810721
820047
Fig. 12
Fig. 13