Repair Guide, Diagrams and Assembling Charts

May 1997
Camera body 203FE - 205FCC - 205TCC
Revision 0
Shutter: Electronically controlled mechanical focal plane shutter with
(203FE/205FCC) release solenoid system. Horizontally running textile curtains.
Shutter speed range 90 s - 1/2000 s and B. In manual mode up
to 34 minutes. Fully mechanical C setting for lenses with
built-in leaf shutters.
Flash synchronization at all speeds from B to 1/90 s.
Shutter: Electronically controlled mechanical focal plane shutter with
(205TCC) release solenoid system. Horizontally running textile curtains.
Shutter speed range 16 s - 1/2000 s and B. Fully mechanical C
setting for lenses with built-in leaf shutters.
Flash synchronization at all speeds from B to 1/90 s.
Lens mount: Hasselblad bayonet mount for FE, F, CF and C lenses. Contacts
for data-bus communication with the FE lenses.
Viewfinder: Focusing hood with 4 x magnifier, interchangeable with
magnifying hood and prism viewfinders with or without
exposure meter. Acute-Matte focusing screen interchangeable
with other Hasselblad focusing screens. Illuminated flash and
warning symbols.
Display: LCD display with all relevant exposure and operational data.
Switch-controlled low light illumination.
Winding & Manual single turn winding crank. Simultaneous shutter
film advance: cocking and film advance. The crank is interchangeable with
the Hasselblad Winder for a frame rate of up to 1.3 fps.
General description 1:1
Design: Medium format single reflex camera with built-in TTL selective
meter electronically connected to FE lenses and E magazines.
Interchangeable lenses, film magazines, viewfinders and
focusing screens.