Operation Manual

ManualsBrandsHasselblad ManualsCamerasHasselblad 202 FA

1

2

3

4

5

6

7

8

9

gaging the

recesses.

Carefully swing the

magazine

to-

wards the camera body, checking that the camera's up-

per

support

hooks fit into

the slots

in

the

magazine.

Push

the

magazine

gently but

firmly

against the

hooks

while sliding the

magazine

catch to the

right.

Release

the

button

when the magazine has made contact with the

camera body and

then push the button to the left to en-

sure that

it has reached the locked

position.

Remove the

slide to

positively lock

the

magazine

to the

camera body.

The camera is now ready to use.

':,:t:t:.1:.,:.a::t:.t:.:i.i:.1::.t::

Removing the

mag_azin

Removing the

magazine is

simply the

reverse

of the

at-

taching

procedure.lt is advisable to have the camera ful-

ly wound and the

magazine

status

indicator

displaying

white.lnsert

the

magazine

slide

fully and with the hinge

towards the

front of the camera. Slide the magazine catch

to the right, tilt the

magazine

back and

lift it

offthe

lower

supports.

The magazine

cannot be

removed

without inserting

the

magazine

slide.

The slide

protects

the

film from fogging.

Ensure

that the slide

is

pushed

all the

way into

the

magazine.

Note

also that the

camera

cannot

be

operated when a

magazine,with

the

slide

inserted, is

attached to the

camera.

:::

::::|

|:|::::::::::: |:||:

Themagazinestatusindicator

:,it.:tjt,.$::,'tl

The status indicator on the

right hand

side of the

maga-

zine

shows

white when the magazine is ready to operate

and red when the

film has not

been advanced after an

exposure.

If

the status

indicator

shows

red, release

the

camera first before attaching the magazine. Then, wind-

ing

the camera again will automatically advance the

film

by

one

frame.

Do not

attach a

magazine

showing

white

to a comera that

is not rewound!

Wind

the camera

first

or

you

will lose

a

frame.

Do not

attach a

magazine

showing red

to a fully wound camera! This

could

re-

sult

in

a double exposure.

Op91.in.g.the_fo-cusing hood.

,.l.i..I*lli

Lift

the

lid

with a firm grip on the tab at its rear edge and

swing it up to a vertical position. The hood

unfolds

auto-

matically and locks in

open

position.

The built-in magnifier

::::)..1:l::tt::::tl::::

,l:.T.::,iEtl,

The magnifier flips

up

into

the viewing position when

the oval

button

inside

the

lid is moved

to the

right,

as

in

the

illustration.

To fold

the

magnifier

down simply press it back down to-

wards the

lid

until it locks into place.

It can easily be exchanged to suit individual eyesight

(see

"Changing

the

magnifier").

Closing the

focusing

hood

Fold

away the

magnifier

by pressing

it

back down to-

wards the

lid

until

it locks

into place.'PincH in the

side

plates at the

hinge points

and then push the lid lightly

backwards.

The hood

then automaticallv folds back

down.

A

A