Service Manual

April 1998Revision 0
Shutter: Electronically controlled mechanical focal plane shutter with
release solenoid system. Horizontally running textile curtains.
Shutter speed range 90 s - 1/1000 s and B.
In manual mode up to 34 minutes.
Flash synchronization up to 1/90 s.
Lens mount: Hasselblad bayonet mount for FE, F, CF and CFE lenses.
Contacts for data-bus communication with the FE lenses.
Viewfinder: Focusing hood with 4 x magnifier, interchangeable with
magnifying hood and prism viewfinders with or without
exposure meter. Acute-Matte D focusing screen
interchangeable with other Hasselblad focusing screens.
Display: LCD display with all relevant exposure and operational data.
Switch-controlled low light illumination.
Winding & Manual single turn winding crank. Simultaneous shutter
film advance: cocking and film advance. The crank is interchangeable with
the Hasselblad Winder F for a frame rate of up to 1.3 fps.
General description 1:1
Design: Medium format single reflex camera with built-in TTL selective
meter electronically connected to FE lenses and E magazines.
Interchangeable lenses, film magazines, viewfinders and
focusing screens.
Exposure meter: TTL metering at full aperture with FE lenses. High sensitivity
silicon photocell. Selective meter area approximately 20% of
the image area. Metering range EV 0.5 to EV 21.5 at ISO
100/21° and f 2.8.
Exposure adjustment ± 5 stops in 1/3-stop increments.
Camera body 202FA