User guide

35
7. Adding Fuel / Heating at
Nominal Thermal Output
More fuel should be added to the re when the
amesfromthepreviousburningoffphasehavejust
gone out.
Adding Fuel / Heating at Nominal Output
Procedure Position of
Control Elements
Adjust secondary air. Set air slider to position
2(g.4).
Add two logs weighing
approx. 1.9 kg in total.
Placelogswiththeendto
thefrontofrebox.Only
add a single layer of fuel.
Openreboxdoor.
Closereboxdoor.
Tab. 2
 g. 4
8. Emptying the Ash Drawer
Asasafetyprecaution,pleasemakesurethatyou
only dispose of ashes once they are cold.
The ash drawer contains the mineral components
of the wood (approx. 1%) as combustion residues.
Lifttheregrateandtiltittowardstheback(g.5).
Thefurnaceashdumpcanthenberemoved(g.6).
 g. 5
 g. 6