Instruction Manual

38
12. Technical Data
The Merida, certifi ed in compliance with DIN-EN 13240 : 2001 + A2 2004 and Art. 15
a B-VG (Austria), can only be operated when the fi re box is closed; more than one device
can be connected to the chimney.
VKF-No.: 21010; Inspection Report No. (A): FSPS-Wa 1962-A
The following data applies to the chimney characteristics in accordance with EN 13384-1 / 2:
Depending on the insulation of the building, the nominal thermal output of 4 kW indicated
on 10 - 50 m² (subject to change)
Dimensions: Height Width Depth
Stove 135 cm 48 cm 41,5 cm
Fire box 34 cm 22 cm 27 cm
Weight (steel/ceramic): 136/144 kg
Flue pipe diameter: 15 cm
Pipe diameter of Hase ventilation system* 10 cm
* For separate air supply in low-energy houses and insuffi cient combustion air supply in the
room where the stove is installed
Front view Side view
Combustion Values Wood Briquettes
Nominal Thermal Output 4 4 kW
Waste Gas Mass Flow Rate 4 4 g/s
Waste Gas Outlet Temp. 280 280 ˚C
Min. Supply Pressure at Nominal Thermal Output 12 12 Pa
CO content at 13% O2 1059 1113 mg/m³
Effi ciency 80 79 %
Particulate 23 50 mg/m³
Stove height: 135
Height for top installation: 132
48
41,5
18,5
Height for rear installation (only ceramic variant): 122
Top view
37
6,5
Ø 24
Dimensions in cm
Height for the inst. of Hase air system: 10
Connection area for
the inst. of Hase air
system below