Datasheet

Preparations (continued)

Antenna Connection

75-ohm coaxial cable (round cable)

300-ohm twin-lead flat feeder

To antenna

input terminal

INSTALL the unit in a room where direct light will not fall upon the screen. Total darkness or a reflection on the picture

screen may cause eyestrain. Soft and indirect lighting is recommended for comfortable viewing.

Optimum reception of color requires a good signal and will generally mean that an outdoor aerial must be used. The

exact type and position of the aerial will depend upon your particular area.

It is recommended that the 75-ohm coaxial cable be used to eliminate interference and noise which may occur due to radio

wave conditions.

The aerial cable should not be bundled with the power cord and the like.

Note:

Power Connection

AC cord

AC INPUT

1. Connecting the female plug to the AC socket on the unit.

2. Connecting the male plug to the wall outlet as illustrated.

Note:

bottom view

<This product should be operated only from the type of power source indicated on the marking label.

<Always unplug the AC cord from power outlet when not using for a long period of time.

<This illustration is for reference only. The AC plug may be different on different models.

Plug into AC outlet.

Household

power outlet