Datasheet

With working in D-Sub or DVI mode, this unit allows you to perform many adjustments.
Adjustment in D-Sub/DVI Mode
Adjusting Image Horizontal Size
Fine Tune
You may find that images blur, depending on the clock phase of your PC's Processor. If you experience
blurring , you can obtain a clearer image by adjusting the [Fine Tune] item.
Adjusting the Screen Automatically
Video
Option
Program
Screen
Audio
1. H Size 0
2. H Position 0
3. V Position 0
4. Fine Tune 00
5. Smoothing Mode: Both off
6. Default
7. Auto Sync
8. Advanced: >>>
Press MENU to display the menu main page.
1
Press CH6 to select H Size item.
2
Press VOL+/- to adjust until you are satisfied.
3
Press MENU to exit.
4
Press VOL+/- repeatedly to display Screen menu page.
5
Changing the Position of Image
Video
Option
Program
Screen
Audio
1. H Size 0
2. H Position 0
3. V Position 0
4. Fine Tune 00
5. Smoothing Mode: Both off
6. Default
7. Auto Sync
8. Advanced: >>>
Press CH6 to enter the menu and press CH5 or CH6to select H
Position or V Postion.
Press MENU to display the menu main page.
1
2
Press VOL+/- to adjust until the picture is well-aligned.
3
Press MENU to exit.
4
Press VOL+/- repeatedly to display Screen menu page.
5
After connecting the unit to your PC, adjust the position of the screen if it is not well-aligned.
Press CH6 repeatedly to select Fine Tune.
Press MENU to display the menu main page.
1
2
Press VOL+/- to adjust until the picture is well-aligned.
3
Press MENU to exit.
4
Press VOL+/- repeatedly to display Screen menu page.
5
Video
Option
Program
Screen
Audio
1. H Size 0
2. H Position 0
3. V Position 0
4. Fine Tune 10
5. Smoothing Mode: Both off
6. Default
7. Auto Sync
8. Advanced: >>>
Video
Option
Program
Screen
Audio
1. H Size 0
2. H Position 0
3. V Position 0
4. Fine Tune 00
5. Smoothing Mode: Both off
6. Default
7. Auto Sync
8. Advanced: >>>
3
4
2
1
Press MENU to display the menu main page.
Press VOL+/- repeatedly to display Screen menu page.
Press CH6repeatedly to select Auto Sync item.
You may quickly adjust the screen by using the STEREO button
directly. The unit automatically adjusts phase, clock or position, etc.
Press ENTER to confirm and press MENU repeatedly to exit.
28
Note:
The [Fine Tune] item can not be accessed in DVI mode.
Note:
The [Auto Sync] item can not be accessed unless the unit is in VGA mode.
The Auto Adjust” function only works in VGA mode.