Datasheet

Setting Picture
Customizing the Picture
Press MENU to display the menu main page.
1
Press CH6 to enter the menu and select item with CH5 or CH6.
2
Press VOL+/- to adjust the value of the item.
3
Press MENU to exit.
4
Using the Preset Picture Mode
There are three preset picture modes [Vivid, Standard and Mild] and one user-set picture mode [Custom].
Each preset mode has its own picture settings.
[Vivid]: Select for a bright picture.
[Standard]: Select for a normal picture.
[Mild]: Select for a fine/soft picture.
You may directly use the P.M button on the remote control to select a desired picture mode .
The [Hue] item is for NTSC only.
Video
Option
Program
Screen
Audio
Vivid
Mild
Custom
Standard
1. Mode: Standard
2. Contrast 50
3. Brightness 50
4. Color 50
5. Hue 00
6. Sharpness 50
7. DNR Auto
2
3
4
Press MENU to display the menu main page.
Press CH6to select Mode item.
1
5
Press VOL+ or ENTER to access the sub-menu.
Press CH5/6 to select a desired picture mode.
Press ENTER to confirm and press MENU repeatedly to exit.
The [Video] menu page will be highlighted automatically.
Video
Option
Program
Screen
Audio
1. Mode: Custom
3. Brightness 60
4. Color 50
5. Hue 00
6. Sharpness 50
7. DNR Auto
2. Contrast 40
The [Video] menu page will be selected automatically.
Press VOL-Adjustment item
Value range
0 – 100
Press VOL+
Decrease contrastContrast Increase contrast
Lower color intensityColor Higher color intensity
Soft pictureSharpness Sharp picture
Towards purpleHue * Towards green
Less bright More bright
Brightness
0 – 100
0 – 100
-50 – +50
0 – 100
Reducing Picture Noise
Press MENU to display the menu main page.
1
Press CH6 repeatedly to select the DNR item.
2
The [Video] menu page will be selected automatically.
Press VOL+ or ENTER to access the sub-menu.
Press CH5/6 to select.
Press ENTER to confirm and press MENU repeatedly to exit.
3
4
5
Video
Option
Program
Screen
Audio
1. Mode: Custom
2. Contrast 40
3. Brightness 60
4. Color 50
5. Hue 00
6. Sharpness 50
7. DNR Auto
Weak
Medium
Strong
Auto
Sometimes a noisy picture may appear on the screen because of poor signal. This function helps to enhance
the picture quality by reducing the noise.
Freezing picture
Press the FREEZE button to hold on the image on the screen (the video
sources still run). Press again to reactivate the image.
Note:
For the sake of protecting the screen, please do NOT freeze a picture for a long time.
Freeze Picture
21