Datasheet

Decoder

Connect a Decoder

Connections (continued)

21-pin Euro-SCART

connector

Connect the Scart Cable between the unit and the decoder.

How to connect:

1. Turn on your LCD TV , press SOURCE button on the remote

control.

2. Press CH5/6 to select SCART 2 AV and press ENTER to confirm.

3. Turn on your deocder.

To watch Decoder

1 Audio output B (right) 9 Ground 17 Ground (video input & output)

2 Audio input B (right) 10 Comms data 2 (luminance ground)

3 Audio output A (left) 11 - 18 -

4 Ground (audio) 12 Comms data 1 19 Video output (composite)

5 Ground 13 Ground (chrominance) 20 CVBS/Luminance input

6 Audio input A (left) 14 Ground (blanking) 21 Common ground (shield)

7 - 15 Chrominance input

8 Function select (AV control) 16 -

Specification of SCART 2 interface

Note:

<The unit receives CVBS (VIDEO) signal and Y/C (S-VIDEO) signal from SCART2 interface.

<When receiving Y/C signal, you need to select SCART 2 Y/C instead of SCART 2 AV in the source select menu.

Therefore, if you find that the color is not properly displayed, please try to select SCART 2 Y/C.

S VID EO

VID EO

AV1 IN / S- VIDEO IN

SCAR T1 VI DE O/ RG B

( )

SCAR T2 V IDEO/ S-VID EO

(

)

AUD IO

L/MON O

Select Main Source

1. TV

2. Video

3. S-Video

4. Scart 1

6. Scart 2 Y/C

7. YPbPr

8. D-Sub

9. DVI

5. Scart 2 AV