Datasheet

Connections
Cautions before connecting
Carefully check the terminals for position and type before making any connections.
The illustration of the external equipment may be different depending on your model.
Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their
terminals.
Refer to the operating manual of the external device as well.
When connecting an external device, turn the power off to avoid any issues.
Connect a VCR
-
S VIDEO
AV IN
Rear of the VCR
VCR
RL
VIDE O
AUDIO
21-pin Euro-SCART
connector
SCART Cable
SCART
1 Audio output B (right) 8 Function select (AV control) 15 Red input
2 Audio input B (right) 9 Ground (green) 16 RGB switching control
3 Audio output A (left) 10 Comms data 2 17 Ground (CVBS input & output)
4 Ground (audio) 11 Green input 18 Ground (RGB switching control)
5 Ground (blue) 12 Comms data 1 19 CVBS output
6 Audio input A (left) 13 Ground (red) 20 CVBS input
7 Blue input 14 Ground (blanking) 21 Common ground (shield)
Specification of SCART1interface
Note:
The unit receives CVBS (VIDEO) signal and RGB signal from SCART1 interface and is able to identify the signal format
automatically. The unit chooses the RGB signal prior to the CVBS (VIDEO) signal.
Connect the Scart Cable between the unit and the VCR.
How to connect:
1. Turn on your LCD TV , press SOURCE button on the remote
control.
2. Press CH5/6 to select SCART1 and press ENTER to confirm.
3. Turn on your VCR , insert a videotape and press the Play button.
To play VCR
Select Main Source
1. TV
2. Video
3. S-Video
5. Scart 2 AV
6. Scart 2 Y/C
7. YPbPr
8. D-Sub
9. DVI
4. Scart 1
S VID EO
-
VID EO
AV1 IN / S- VIDEO IN
SCAR T1 VI DE O/ RG B
( )
SCAR T2 V IDEO/ S-VID EO
(
)
AUD IO
L/MON O
R
RF
9