Installation Guide

2. Installation of Main Power / Communication Harness

Route cords 006-6650LS2 along this path or similar inside of the baler. Keep cords away from moving parts

and hydraulic hoses. Secure with existing cable clamps or use cable ties. When all connections are made to

DCP secure wires.

Connecting the optional ISOBUS plug to the tractor

Attach the optional ISOBUS connector (006-6670A) to the end

of the communication harness (006-6650TM).

Connect the orange wires and attach the plug to the tractor’s

ISOBUS port.

Then connect the ISOBUS connector to the ISOBUS plug on

the tractor.