User Guide

Module: Resynator
91
How to record a stick movement:
A new recording on the same track (at the same
parameter level) overwrites a previously recording
without warning!
• In the given module, use select (in the
resynator only) and parameter level to
determine the parameter level at which you
want to create an animation.
• Press the record stick button to set the
recording function to standby. The LED above
the button flashes.
• Start the actual recording by satisfying the
trigger condition defined for the basic settings
parameter stick record start; in other words,
move the stick or press any key on the
keyboard.
The LED lights up continuously during the
recording process.
Every movement of the stick controller is
recorded.
• Stop recording by pressing the record stick
button again.
The track is stored along with the other sound-
specific data in the sound database when the
sound is stored.
If you do not store the sound, the recording is
lost when you change the sound/setup or
switch Neuron off!
How to start a stick animation:
• In the given module, use select (in the
resynator only) and parameter level to
determine the parameter level at which you
want to play back an animation.
Press the contour contr. button for this level
repeatedly so that the stick animation LED
lights up.
Repeat this step for every desired parameter
level.
Neuron.book Seite 91 Montag, 23. Dezember 2002 2:28 14