User Guide

88
Module: Resynator
• LFO: If you want to modulate the model via an
LFO oscillation, first define the oscillation in
the mod module (page 117), then define the
modulation depth for pitch, volume or
individual parameter values in the resynator
(see parameter descriptions starting on
page 77).
• Contour control: Use the contour contr.
button to activate stick animation for the
resynator or to modulate model parameters via
envelope (shaper 1 LED lights up).
You must activate stick animation or the shaper
envelope specifically for every scape and sphere
parameter level. This means that in order to
modulate all levels, you must the select the
parameter levels via select and parameter
level and define the modulation source using
contour contr.
Stick animation is only available if a recording
of the stick movement (or track) has been
made for the given level. For more on this, read
the section starting on page 89.
If you want to use an envelope to modulate the
model parameters at a given level, you must
define the ADSR envelope in the appropriate
shaper and determine the desired depth (see
page 110).
The setting contour control = shaper 1 applies
to the parameter envelope only! The amp
envelope, which modulates resynator volume,
remains unaffected by this setting!
Neuron.book Seite 88 Montag, 23. Dezember 2002 2:28 14