User Guide

Module: Resynator
87
How to edit models in the resynator:
• To edit a model’s parameter values, first select
the parameter region (select button), then the
desired level (parameter level button).
• Edit the current level’s parameters using the
stick controller. The four displays surrounding
the stick indicate the current values:
• Once you have "touched" a parameter level
with the stick, the first parameter also appears
in the main display and can be fine-tuned there
using the knob:
• Stick.right and stick.left to access and edit
the other parameters at the same level.
Stick.up/stick.down takes you to the model’s
other parameter levels.
• Tune the resynator up or down using the octave
button. Go to the menu option pitch and scroll
to the right to detune the model in semitone or
cent steps (see the menu diagrams starting on
page 75).
• Velocity: If you want to modulate resynator
volume or individual cross-x parameter values
via key pressure, define the given velo depth
parameter in the resynator menu (see page 78).
• Key tracking: If desired, define volume key
tracking for the entire resynator (see page 78)
or key tracking for individual model parameters
(page 79).
You have a function called snapshot at your
disposal when editing. It lets you save the current
sound settings at any time. In combination with the
play/compare button, you can audition your
snapshots and A/B or compare the edited sound to
the original.
Snapshots are described on page 52.
Neuron.book Seite 87 Montag, 23. Dezember 2002 2:28 14