User Guide

84
Module: Resynator
Model
Hi/Lo
Velo Switch
Heads up: This parameter is enabled
only when the model loaded in the
resynator distinguishes between low and
high velocity zones. This property is
determined when the model is created in
ModelMaker.
The parameter defines a velocity
threshold value. If the pressure applied
to the key exceeds the threshold value,
the high velocity zone plays. If the force
of your key attack falls short of the
defined threshold value, the model’s low
velocity zone sounds.
That way you can address two sound
components within a model by simply
varying key pressure.
Value range: 1 to 127.
Table 7: Resynator parameters (cont.)
Neuron.book Seite 84 Montag, 23. Dezember 2002 2:28 14