User Guide

Module: Resynator
79
LFO Depth
L1 Scape 1/3
to
L3 Sphere 2/4
Determines the modulation depth of the
mod-generated LFO oscillation and thus
the intensity of its effect on the
opposite cross-x scape and sphere
parameter pairs (1/3 and 2/4).
Value range: -64 to +63
LFO depth = 0: Parameters are not
modulated.
LFO depth > 0: Starting at the current
value, the parameter value increases in
accordance with the LFO oscillation (up
to a max value of 127).
LFO depth < 0: The value decreases in
accordance with the LFO oscillation.
Note in this context the global LFO
depth, which is defined directly in the
mod module (page 116). Global LFO
depth is offset against this modulation
destination’s depth value.
Table 7: Resynator parameters (cont.)
KeyTrack
L1 Scape 1/3
to
L3 Sphere 2/4
Weights model parameters for different
keyboard zones. The higher the
parameter’s weight, the greater is its
influence and the more intense the
effect of parameter value changes.
Key tracking is defined separately for
each scape and sphere parameter level.
Note that you can differentiate between
the two cross-x parameter pairs within a
level.
Example:
Keytrack L3 sphere 2/4
weights the third sphere level’s second
and fourth parameter.
Value range: -64 to +63.
0 = No weighting
Positive values: Notes above the center
key (C3) are weighted higher than notes
below C3. The higher the value, the
further this weighting is shifted to the
right of the keyboard.
Negative values: Notes below the center
key (C3) are weighted higher than notes
above C3. The lower the value, the
further this weighting is shifted to the
left.
See also the illustration on page 85.
Table 7: Resynator parameters (cont.)
Neuron.book Seite 79 Montag, 23. Dezember 2002 2:28 14