User Guide

Module: Resynator
75
Resynator: Menu
Press the model select/menu button to access the
resynator menu. The most recently edited resynator
menu option appears in the main display. Press this
button again to access model loader.
The resynator menu is a matrix. Stick.up/down to
scroll through the main menu options as well as
through related options in a submenu.
Example: Stick.down takes you from <L3 scape 4>
directly to <L3 sphere 4> and Stick.up leads to <L2
sphere 4>.
The rotary knob adjusts numeric values or scrolls
through predefined settings.
The model select/menu button takes you to this
menu, as do diverse other resynator control features.
For example, when you move the stick controller the
values of the currently edited model parameter
appear directly in the display and can be edited via
knob.
Though the following diagrams show resynator 1’s
menu (the display indicates
R1 in line 1) only, these
illustrations serve as an example for both resynators.
Note also that the device shows the actual parameter
names in line 2 rather than the dummies
<
scape>/<sphere> shown here.
... Continued from previous page
The amplifier envelope defined in the
shaper is always active for the entire
resynator, regardless of the contour
control setting in the resynator.
To find out how to define an envelope,
please read the section starting on
page 110.
• Stick Animation: The stick movement
previously recorded via record stick is
played back as a 1shot or in repeat mode,
depending on the stick animation
setting in the resynator menu (see
page 80). Manual stick movements have
no effect on the current parameter level
while stick animation is activated!
Octave
button
The pitch for the given model can be
edited in octaves.
Note also in this context the pitch menu
options semi and cent in the resynator
menu (see page 82).
Table 6: Resynator control features (cont.)
Neuron.book Seite 75 Montag, 23. Dezember 2002 2:28 14