User Guide

74
Module: Resynator
Parameter
Level
(1 / 2 / 3)
button
Scape and sphere parameters are ordered
in three levels each. After you have
chosen a region using the select button,
this menu is where you determine the
level to be processed via stick. Again,
Neuron "memorizes" the current settings
when you switch to another level.
Record
stick button
The movements of the stick controller can
be recorded and stored for every scape and
sphere parameter level.
By activating stick animation, you can
play the recorded movement back (see the
next line in the table).
This lets you program extremely vigorous
modulations as an integral component of
a sound. To learn how to record stick
controller movements, read page 89.
Table 6: Resynator control features (cont.)
Contour
control
button
An ADSR envelope or previously recorded
movement of the stick controller can
influence every scape and sphere
parameter level. The contour settings can
be determined separately for every
parameter level, so you have six contour
controls available for each resynator.
By pressing this button several times, you
can select between:
• Off (no LED lights up): An envelope or
stick recording does not manipulate the
selected parameter level.
• Shaper: The par. level ADSR envelope in
the given shaper is assigned to the
current scape or sphere parameter level.
Note that the par. levels LED in the
shaper must light up before you can
define the envelope.
Continued on next page...
Table 6: Resynator control features (cont.)
Neuron.book Seite 74 Montag, 23. Dezember 2002 2:28 14