User Guide

68
Module: Programmer
• The current setup number or name appears in
the main display.
• Twist the knob to select the number under
which you want to store the setup. The name of
the setup currently stored under this number
appears. Note that this setup will be
overwritten!
• Name the new setup: Stick.right the navigation
stick to access the first character in the
display’s second line. The name of the currently
stored setup appears in the display and you can
now overwrite it (see the example display).
Twist the knob to select the desired character.
Use the navigation stick and the knob as
described above to change each character in
the name line.
• After you have named the setup, confirm the
storage process by pressing the rotary knob.
The display reads
Saving... for a moment
and returns to the most recently active menu at
the end of the storage process.
Tip: Stick.up/stick.down to select uppercase
and lowercase.
You can cancel the store operation at any time with
the exit button before you send the setup off to its
new address! This returns the display to the most
recently edited menu option.
Neuron.book Seite 68 Montag, 23. Dezember 2002 2:28 14