User Guide

Module: Programmer

For example, say you have edited sound 3 and

want to store sound 3 under another name and

number.

• Select sound 3 using the knob.

• Confirm your selection via enter.

The rest of the procedure is the same as the

procedure for storing a sound in sound mode.

• If necessary, dial in a new number with the

knob and assign a new name to the sound.

For details on how this is done, please read the

description on page 51.

• Confirm the storage process by pressing enter

(the rotary knob). The display reads

Saving...

for a moment and then returns

to the most recently edited menu option.

After you have stored the sound under another

number and with a new name, the new sound

automatically takes the place of the old sound in the

setup.

How to program a setup

You have two options for programming a setup:

either load a previously programmed setup and

change the settings as desired or generate a new

setup by loading a "fresh" number and begin

assigning the sounds.

After you have loaded the desired sounds, toggle the

navigation stick to scroll through the setup menu

(see page 59) and define the various parameters for

each sound. All parameters are described in the table

starting on page 61.

How to store a setup

The store function in setup mode works like the save

as... command commonly used on computers. You

can either store the setup under the current number

or put the setup some other place within the setup

database.

• Press the red programmer store button while in

setup mode. Now you can select what you want

to store:

Press enter to select the

setup

Neuron.book Seite 67 Montag, 23. Dezember 2002 2:28 14